Profibus Device - ADF Web HD67675-IP-A1 User Manual

Industrial Electronic Devices

PROFIBUS DEVICE:

By pressing the "Add Slave PROFIBUS" and
the "PROFIBUS Network" window (Fig. 4) the "PROFIBUS Device" window appears (Fig. 6).
In this window is possible to:
Set the PROFIBUS Slave
ID ("ID Slave
PROFIBUS");
Select the Modules
present in the PROFIBUS
Slave from the Available
Modules in GSD
("Module Selection");
Modify the User
Parameters (if present)
of the PROFIBUS device
("User
Parameters");
Modify the Parameters (if
present) of the Module
Selected ("Module
Parameters");
Watch Features
Baudrate supported from
the PROFIBUS device
("Capabilities");
Select the Sync, Freeze
and Reset of Data
Options ("Options").
ADFweb.com S.r.l.
"Modify Slave
file
and
Figure 6: "PROFIBUS Device" window
User Manual BACnet slave / PROFIBUS master - Converter
Document code: MN67675_ENG
PROFIBUS" button (or double click above an existent PROFIBUS Slave) from
Revision 1.010 Page 24 of 40