Table of Contents
Advertisement
Industrial Electronic Devices
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip2 of 'Dip-Switch A':
The first, with Dip2 at "OFF" position (factory setting), is used for the normal working of the device.
The second, with Dip2 at "ON" position, is used for uploading the Project and/or Firmware.
For the operations to follow for the updating, see 'UPDATE DEVICE' section.
According to the functioning mode, the LEDs will have specifics functions, see 'LEDS' section.
Warning:
Dip1 of 'Dip-Switch A' must be at ON position to work even if the Ethernet cable is not inserted.
ADFweb.com S.r.l.
User Manual BACnet slave / PROFIBUS master - Converter
Document code: MN67675_ENG
Revision 1.010
Page 11 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67675-IP-A1 and is the answer not in the manual?
Questions and answers