ADF Web HD67675-IP-A1 User Manual page 26

Industrial Electronic Devices
By pressing the "Manual Module" button from the "PROFIBUS Device" window (Fig. 6) the "Add Module Manually" window appears (Fig. 8).
In this window is possible to add a Module manually, i.e. writing the configuration of the module (in hexadecimal).
The means of the fields are:
In the field "Description of
In the field "Insert the Configuration of Module
configuration of the module is defined. The configuration must be write
in hexadecimal mode (without prefix "0x" o "$").
To modify a Module inserted manually, is neccessary to do a double click on the
module to change in the "Select Module" list (Fig. 7, point (1)). It is possible to
change only the module inserted manually.
Note:
The Values inserted in the table must between 00 and FF.
ADFweb.com S.r.l.
Module" a name of the Module is defined;
User Manual BACnet slave / PROFIBUS master - Converter
Document code: MN67675_ENG
(HEX)" the
Figure 8: "Add/Modify Module Manually" window
Revision 1.010 Page 26 of 40