Extron electronics IPL EXP Series User Manual page 51

Command Function
Echo for SIS-over-SSH (port 22023)
Enable echo
Disable echo
View echo status
NOTES:
•
The echo setting is for the current connection session only. Enable echo after the connection is established. It remains on until
the connection is closed. Extron recommends disabling echo right after a successful connection in order to avoid seeing excessive
]
CRLFs ( ) in responses.
•
ECHO
The command returns an E14 error response if the command is sent from a non-SIS-over-SSH host connection.
•
Echo is on (enabled) by default.
SNMP (Simple Network Management Protocol)
Set SNMP unit contact
24
Set SNMP unit contact to
default
24
View SNMP unit contact
Set SNMP unit location
24
Set SNMP unit location to
default
24
View SNMP unit location
Set Community Public string
Set Community Public to
default
24
View Community Public
Enable SNMP access
24
Disable SNMP access
24
View SNMP access setting
X8#
KEY:
= Enabled/disabled (on/off) status
X58!
= Text, 1 to 64 characters
SIS Command
(Host to Unit)
E }
1 ECHO
E }
0 ECHO
E }
ECHO
E X58! }
C SNMP
E }
C•SNMP
E }
C SNMP
E X58! }
L SNMP
E }
L•SNMP
E }
L SNMP
E X58! }
24 P SNMP
E }
P•SNMP
E }
P SNMP
E }
E1 SNMP
E }
E0 SNMP
E }
ESNMP
0
= off or disabled,
This can be comprised of all human-readable characters except the pipe (|) character. It cannot
be a single space.
IPL EXP Power Series • Modes of Operation, SIS Control and Configuration
Response
(Unit to Host)
]
Echo1
]
Echo0
X8#]
X58!]
SnmpC*
]
SnmpC*Not•Specified
X58!]
X58!]
SnmpL*
]
SnmpL*Not•Specified
X58!]
X58!]
SnmpP*
]
SnmpP*public
X58!]
]
SnmpE*1
]
SnmpE*0
X8#]
1
= on or enabled
Additional Description
Set echo on. Returns the command
entered along with the response, like
PuTTY.
Set echo off. Returns the response only,
like Telnet.
X58!
Sets unit contact to .
View the text of the unit contact.
Default = "Not Specified".
X58!
Sets unit location to .
Sets community public string (password)
X58!
to .
Default = "public".
X8# 0
Default = disabled ( = ).
41