Extron electronics IPL EXP Series User Manual page 49

Command Function
Additional IP-related commands
Ping a device to determine its availability on the network
Execute a ping test using IPv4
only
24
Execute a ping test using IPv6
only
24
If a ping test for either IPv
version fails to receive a reply
from the address:
NOTES:
•
If a ping command fails to receive a reply from a device, the <
•
If a ping command that uses a device name fails to receive a reply from the device (or the name cannot be resolved) the <
0.0.0.0
value is
•
ttl
TTL < >is time to live, in router hops (decremented by 1 for each router encounter). It is the maximum number of hops from router to
router that a packet of information can make before being discarded.
•
time
< > = time to receive the reply, in milliseconds.
Hostname operations (finding the IP address of a hostname)
Get the IPv4 address for a
hostname
Get the IPv6 address for a
hostname
Get the IP address by
hostname
NOTES:
•
If DNS servers cannot resolve the name, the command returns the IP address as
zeroes) when testing an IPv6 address.
•
If DNS servers cannot be reached within approximately 3 seconds, the response is E18 (command has timed out).
•
PING
Unlike the
Get a report of IP Ethernet settings
Get a report of IPv4 or IPv6
network settings in a "friendly"
format
Get a report of IPv4 or IPv6
network settings in JSON format
X57^
KEY:
= NIC number
SIS Command
(Host to Unit)
E unit address or name
<
Verbose mode 2/3:
unit address or name
E
<
Verbose mode 2/3:
Verbose mode 2/3:
when testing an IPv4 address, and
E X57^ name
V *<
Verbose mode 2/3:
E X57^ name
V *<
Verbose mode 2/3:
E X57^ name
V *<
Verbose mode 2/3:
command, the named-device does not need to be online or reachable to find and report the resolved IP address
E X57^ }
R ETHN
E X57^ }
J ETHN
1-3
. For the IPL EXP, the NIC (Network Interface Card) is
If a NIC number is not applicable to the product, the unit returns an E13 error code.
IPL EXP Power Series • Modes of Operation, SIS Control and Configuration
Response
(Unit to Host)
}
>*4PING
address bytes
< >*<
original address or name
Ping•<
ttl time
< >*< >
}
>*6PING
address bytes
< >*<
original address or name
Ping•<
ttl time
< >*< >
address
< >*0*0*0
original address or name
Ping•<
]
0*0*0
bytes
> value is 0.
::
(all zeroes) when testing an IPv6 address.
}
>*4 HNAM
IP address
< >
X57^ name
HnamV *<
}
>*6 HNAM
IP address
< >
X57^ name
HnamV *<
} <IP address> ]
> HNAM
X57^ name
HnamV *<
friendly, human-readable, multi-line report
<
JSON single-line report
<
Additional Description
ttl time ]
>*< >*< >
>*4*<
]
ttl time ]
>*< >*< >
>*6*<
]
]
4 or 6
>*<
]
IP address ]
>*4*< >
]
IP address ]
>*6*< >
<IP address> ]
>*
0.0.0.0
when testing an IPv4 address, and
]
>
1
.
address bytes
>*< >*
address bytes
>*< >*
address
>*< >*
address
>
::
(all
]]
>
39