Extron electronics IPL EXP Series User Manual page 46

Command Function
IP setup commands, continued
Set DNS server IP address
View DNS server IP address
NOTE:
Changes made with the
Set verbose mode
View verbose mode
View number of connections
X1$
KEY:
= IP subnet, or gateway address
X2@
= Verbose response mode
SIS Command
(Host to Unit)
E X1$ }
24 DI
E }
DI
DI
command take effect immediately and to not require a
E X2@ }
CV
E CV }
E }
CC
Verbose mode 2/3:
xxx.xxx.xxx.xxx
0
= Clear/none (default)
1
= Verbose mode is on (enabled)
2
= Verbose mode is off, tagged responses are sent for queries
3
= Verbose mode is on (enabled) and tagged responses are enabled and sent for queries
All port types revert to defaults upon power-cycle or reset (
responses is enabled, all read commands return the constant string + the data, like setting the
value does.
(Example command:
IPL EXP Power Series • Modes of Operation, SIS Control and Configuration
Response
(Unit to Host)
X1$]
Ipd•
X1$]
2BOOT
Vrb X2@]
X2@]
{number of connections}
Icc{number of connections}
(Leading zeros are optional.)
E }
CN
Verbose response:
Additional Description
command.
]
]
zXXX zY zQQQ
, , and ). If tagged
X1@]
Ipn
• ).
36