Advertisement
NEX Robotics
We are now going to compile this code to generate the hex file and we will load same on the
Robot's microcontroller. Select "Build" menu and click on "Rebuild All". It will compile the
"buzzer_test.c" code and will generate "buzzer_test.hex" file for the robot's microcontroller.
You can verify successful compilation in the bottom most "Build" window of the AVR Studio.
You can also verify that "buzzer_test.hex" file is generated in the "default" folder inside the
project folder you have selected.
www.nex-robotics.com
Figure 2.24
Figure 2.25
Fire Bird V Software Manual
25
Advertisement
Need help?
Do you have a question about the Fire Bird V ATMEGA2560 and is the answer not in the manual?