Slamtec Apollo 2.0 User Manual page 8

After downloading and installing RoboStudio, please run "RoboStudio.exe" to
complete the account registration and login, as shown below.
2. Connect to Robot Base
Click "File-Robot" in the menu-toolbar area of RoboStudio, and a docking window
named Robot will appear on the left side of the workspace, as shown below. The
user can connect or disconnect to the robot base through this window.
Right click the whitespace of the robot list, and enter the IP address and port
number in the prompt dialog box as shown in the upper right corner.
Please open the network adapter on computer and find the SSID hotspot of the
robot (you can check it on robot base label), and then click the SSID name and
click Connect in the extended box.( Note: that your wireless network adapter IP
address should be set to automatically obtain using DHCP)
8 / 32