Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Reference Manual page 756

Table Data Processing Instructions
Applicable Program Areas
Operands
Operand Specifications
Description
716
Block program areas
OK OK
N: Table number
Indicates the table number. N must be between 0 and15.
LR: Length of each record
Indicates the number of words in each record. LR must be 0001 to FFFF
hexadecimal (1 to 65,535 words).
NR: Number of records
Indicates the number of records in the table. NR must be 0001 to FFFF hexa-
decimal (1 to 65,535 words).
TB: First table word
Indicates the first word of the table. All of the words in the table must be in the
same data area. In other words TB and TB+LR NR–1 must be in the same
data area.
Area
CIO Area
Work Area
Holding Bit Area
Auxiliary Bit Area
Timer Area
Counter Area
DM Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Indirect DM/EM
addresses in BCD
Constants
Data Registers
Index Registers
Indirect addressing
using Index Registers
DIM(631) registers the words from TB to TB+LR NR–1 as table number N.
Table number N has NR records and each record is LR words long. The data
within this region cannot be changed once the region has been declared as
records.
Use DIM(631) in combination with SETR(635) (SET RECORD NUMBER) or
GETR(636) (GET RECORD NUMBER) to simplify the calculation of
Step program areas Subroutines
OK
N LR
--- CIO 0000 to CIO 6143
--- W000 to W511
--- H000 to H511
--- A000 to A959
--- T0000 to T4095
--- C0000 to C4095
--- D00000 to D32767
--- E00000 to E32767
--- En_00000 to En_32767
(n = 0 to C)
--- @ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to @ En_32767
(n = 0 to C)
--- *D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
0 to 15 #0001 to #FFFF (binary) or &1
to &65,535
--- DR0 to DR15
--- ---
--- ,IR0 to ,IR15
–2048 to +2047 ,IR0 to –2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15 ,IR0+(++) to
,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Section 3-17
Interrupt tasks
OK
NR TB
A448 to A959
---
---