Omron SYSMAC CJ - REFERENCE MANUAL 08-2008 Reference Manual page 506

Symbol Math Instructions
Description
Flags
Precautions
Examples
466
Area
EM Area without bank
EM Area with bank
Indirect DM/EM
addresses in binary
Indirect DM/EM
addresses in BCD
Constants
Data Registers
Index Registers
Indirect addressing
using Index Registers
*UL(423) multiplies the unsigned binary values in Md and Md+1 and Mr and
Mr+1 and outputs the result to R, R+1, R+2, and R+3.
Md + 1
×
Mr + 1
R + 3 R + 2 R + 1
Name Label
Error Flag ER
Equals Flag =
Negative Flag N
When *UL(423) is executed, the Error Flag will turn OFF.
If as a result of the multiplication, the content of R, R+1, R+2, R+3 is 0000
hex, the Equals Flag will turn ON.
If as a result of the multiplication, the content of the leftmost bit of R+3 is 1,
the Negative Flag will turn ON.
When CIO 000000 is ON in the following example, D00100, D00110, D00111,
and D00110 will be multiplied as 8-digit unsigned binary values and the result
will be output to D00123, D00122, D00121, and D00120.
Md
E00000 to E32766
En_00000 to En_32766
(n = 0 to C)
@ D00000 to @ D32767
@ E00000 to @ E32767
@ En_00000 to @ En_32767
(n = 0 to C)
*D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767
(n = 0 to C)
#00000000 to #FFFFFFFF
(binary)
---
---
,IR0 to ,IR15
–2048 to +2047 ,IR0 to –2048 to +2047 ,IR15
DR0 to DR15, IR0 to IR15
,IR0+(++) to ,IR15+(++)
,–(– –)IR0 to, –(– –)IR15
Md (Unsigned binary)
(Unsigned binary)
Mr
(Unsigned binary)
R
Operation
OFF
ON when the result is 0.
OFF in all other cases.
ON when the leftmost bit of the result is 1.
OFF in all other cases.
Section 3-11
Mr R
E00000 to
E32764
En_00000 to
En_32764
(n = 0 to C)
---