Setting The Pf Key; Pf Setting (Function Key) - Omron E5AN User Manual

Setting the PF Key

4-19 Setting the PF Key

4-19-1 PF Setting (Function Key)

PF Setting
pf
a-m
Set value
OFF
RUN
STOP
R-S
AT-2
AT-1
LAT
A-M
PFDP
Monitor/Setting Item
Monitor/Setting Item 1
pfd1
Item 5
pfd5
1
0
• Pressing the PF Key for at least one second executes the operation set
in the PF Setting parameter (E5AN/EN only).
Symbol
off
run
stop
r-s
at-2
at-1
lat
a-m
pfdp
Note (1) When AT cancel is specified, it means that AT is cancelled regardless of
whether the AT currently being executed is 100% AT or 40% AT.
(2) Alarms 1 to 3, heater burnout, HS alarms, and heater overcurrent latches
are cancelled.
(3) For details on auto/manual operations using the PF Key, refer to 4-13 Per-
forming Manual Control.
(4) Pressing the PF Key for at least one second executes operation accord-
ing to the set value. When the Monitor/Setting Item parameter is selected,
however, the display is changed in order from Monitor/Setting Item 1 to 5
each time the key is pressed.
(5) This function is enabled when PF Key Protect is OFF.
Setting the PF Setting parameter to the Monitor/Setting Item makes it possi-
ble to display monitor/setting items using the function key. The following
table shows the details of the settings. For setting (monitor) ranges, refer to
the applicable parameter.
Setting
Disabled Does not operate as a function key.
RUN Specifies RUN status.
STOP Specifies STOP status.
RUN/STOP reverse Specifies reversing the RUN/STOP
operation operation status.
100% AT Specifies reversing the 100% AT Exe-
Execute/Cancel cute/Cancel status. (See note 1.)
40% AT Specifies reversing the 40% AT Exe-
Execute/Cancel cute/Cancel status. (See note 1.)
Alarm Latch Cancel Specifies canceling all alarm latches.
(See note 2.)
Auto/Manual Specifies reversing the Auto/Manual
status. (See note 3.)
Monitor/Setting Item Specifies the monitor/setting item dis-
play. Select the monitor setting item
according to the Monitor/Setting Item 1
to 5 parameters (advanced function
setting level).
Section 4-19
Function
141