Omron E5AN User Manual page 272

Advanced Function Setting Level
hsh
HS Alarm Hysteresis
Function
Setting
See
See
lba
LBA Detection Time
Function
Setting
See
See
236
• This parameter sets the hysteresis for HS alarms.
Setting range
0.1 to 50.0 A
■ Related Parameters
HS alarm use (advanced function setting level): Page 235
This parameter enables or disables the LBA function and sets the detection
time interval.
• Set the time interval for detecting loop burnouts.
• To disable the LBA function, set 0.
Setting range
0 to 9999 Second
■ Related Parameters
Alarm 1 type (initial setting level): Page 207
LBA level: Page 237, LBA band: Page 237 (advanced function setting level)
Heater burnout and HS alarms must
be supported.
Alarm 1 must be assigned.
The HS Alarm parameter must be
set to ON.
The HS Alarm Latch parameter must
be set to OFF.
Unit Default
0.1
Alarm 1 must be assigned.
The alarm type must be set to 12
(LBA).
Unit Default
0
Section 5-8