Omron E5AN User Manual page 182

Displaying PV/SV Status
Note
SV Status Display
Function
Note
146
Set value
Alarm 3
Alarm 1 to 3 OR status
Heater Alarm (See note.)
• The default is OFF.
"HA" can be selected for models that do not support heater burnout detection,
but the function will be disabled.
Example: When STOP Is Selected for the PV Status Display Function
Normal
C
PV/SP
The SP, Blank, or Manual MV in the PV/SP, PV, or PV/Manual MV Display and
the control and alarm status specified for the SV status display function are
alternately displayed in 0.5-s cycles.
Set value
OFF
Manual
Stop
Alarm 1
Alarm 2
Alarm 3
Alarm 1 to 3 OR status
Heater Alarm (See note.)
• The default is OFF.
"HA" can be selected for models that do not support heater burnout detection,
but the function will be disabled.
Example: When ALM1 Is Selected for the SV Status Display Function
Normal
C
25
PV/SP
100
Symbol
alm3
ALM3 is alternately displayed during
Alarm 3 status.
alm
ALM is alternately displayed when Alarm
1, 2, or 3 is set to ON.
ha
HA is alternately displayed when a heater
burnout alarm, HS alarm, or heater over-
current alarm is ON.
When RUN/STOP
is STOP
C
25 stop
100
100
Symbol
off
No SV status display
manu
MANU is alternately displayed during
manual control.
stop
STOP is alternately displayed while oper-
ation is stopped.
alm1
ALM1 is alternately displayed during
Alarm 1 status.
alm2
ALM2 is alternately displayed during
Alarm 2 status.
alm3
ALM3 is alternately displayed during
Alarm 3 status.
alm
ALM is alternately displayed when Alarm
1, 2, or 3 is set to ON.
ha
HA is alternately displayed when a heater
burnout alarm, HS alarm, or heater over-
current alarm is ON.
When ALM1 Is ON
C
25
Alternating
display
alm1
Section 4-21
Function
Alternating
display
25
Function
100