Omron E5AN User Manual page 24

■ Wiring Terminals
E5GN
• Models with Screw Terminal Blocks
Terminals
Terminals 1 to 6
Terminals 7 to 9
Terminals
Terminals 1 to 6
Terminals 7 to 9
■ Removing the Terminal Block
E5GN Press firmly in on both sides of the terminal block to
release the lock and then pull up on the terminal
block.
xxiv
Previous models
Wire gauge Ferrules
AWG24 to 2.1 mm dia.
AWG14 max.
AWG28 to 1.3 mm dia.
AWG22 max.
5 to 6 mm
5 to 6 mm
Wires Ferrules
Screws Tightening
torque
M2.6 0.23 to 0.25 N·m
M2 0.12 to 0.14 N·m
Previous models
Upgraded models
• Models with Screw Terminal Blocks
Changed from ferrules to crimp terminals for M3
screws.
Tightening torque: 0.5 N·m
• Models with Screwless Clamp Terminal Blocks
Wires: Changed to 10 mm from 5 to 6 mm.
Ferrules: Changed to 8 to 12 mm from 5 to 6 mm.
10 mm
Wires
Upgraded models
Insert a tool into the tool holes (one on the top and
one on the bottom) to release the hooks and pull out
the terminal block.
Note The method for removing the terminal
block is the same for both screw termi-
nal blocks and screwless clamp terminal
blocks.
5.8 mm max.
5.8 mm max.
8 to 12 mm
Ferrules
Terminal hole