Omron CJ1W-C113 - REV 02-2008 Operation Manual page 7

Checking Position Control Unit Version and Internal System Software Version
Version type
Details
Checking method
Correlation
viii
Position Control Units have an internal system software version in addition to
the Unit version used by CS/CJ-series Units to distinguish functions. The fol-
lowing table shows the relationship between the Position Control Unit's Unit
version and internal system software version.
Unit version
Version code for distinguishing functions sup-
ported for CS/CJ-series Units.
The Unit version code is displayed to the right
of the lot number on the nameplate attached
to the Position Control Unit.
The Unit version code can also be checked
from CX-Programmer Ver. 4.0 in Unit Manu-
facturing information of the I/O Table Window.
Pre-Ver. 2.0
Ver. 2.0
Ver. 2.3
Internal system software version
Version code for internal system software.
Press the Ctrl + V Keys while the CX-Position
NC Monitor Screen is displayed.
1.0
2.0
2.3