Unit Version - Omron CJ - 09-2009 Operation Manual

SYSMAC WS02-CX@@-V@
CX-Programmer Operation Manual
Function Blocks
@@
(CS1G-CPU H, CS1H-CPU
@@
CJ1G-CPU H, CJ1H-CPU
@@ @@@@
CJ1M-CPU , CP1H-X
@@@@ @
CP1H-XA - , CP1H-Y
CPU Units)
SYSMAC CS/CJ Series
@@
CS1W-SCB -V1, CS1W-SCU
@@
CJ1W-SCU -V1
Serial Communications Boards/Units Operation Manual
SYSMAC WS02-PSTC1-E
CX-Protocol Operation Manual
CXONE-AL@@C-V3/ CXONE-AL@@D-V3
CX-Integrator Operation Manual
CXONE-AL@@C-V3/AL@@D-V3
CX-One FA Integrated Tool Package Setup Manual
This manual contains the following sections.
Precautions provides general precautions for using the CJ-series Programmable Controllers (PLCs)
and related devices.
Section 1 introduces the special features and functions of the CJ-series PLCs and describes the dif-
ferences between these PLCs and the earlier C200HX/HG/HE PLCs.
Section 2 provides tables of standard models, Unit specifications, system configurations, and a com-
parison between different Units.
Section 3 provides the names of components and their functions for various Units. Unit dimensions
are also provided.
Section 4 outlines the steps required to assemble and operate a CJ-series PLC System.
Section 5 describes how to install a PLC System, including mounting the various Units and wiring the
System. Be sure to follow the instructions carefully. Improper installation can cause the PLC to mal-
function, resulting in very dangerous situations.
Section 6 describes the initial hardware settings made on the CPU Unit's DIP switch.
Section 7 describes initial software settings made in the PLC Setup.
Section 8 describes I/O allocations to Basic I/O Units, Special I/O Units, and CPU Bus Units, and data
exchange with CPU Bus Units.
Section 9 describes the structure and functions of the I/O Memory Areas and Parameter Areas.
Section 10 describes the internal operation of the CPU Unit and the cycle used to perform internal
processing.
Section 11 provides information on hardware and software errors that occur during PLC operation.
Section 12 provides inspection and maintenance information.
The Appendices provide Unit specifications, current/power consumptions, Auxiliary Area words and
bits, internal I/O addresses, and PLC Setup settings, and information on RS-232C ports,.
Name
@@
H,
@@
H,
@
- ,
@@@@ @
-
@@
-V1,
Cat. No.
W447 Describes the functionality unique to the CX-Pro-
grammer and CP-series CPU Units or CS/CJ-
series CPU Units with unit version 3.0 or later
based on function blocks. Functionality that is the
same as that of the CX-Programmer is described
in W446 (enclosed).
W336 Describes the use of Serial Communications Unit
and Boards to perform serial communications
with external devices, including the usage of stan-
dard system protocols for OMRON products.
W344 Describes the use of the CX-Protocol to create
protocol macros as communications sequences
to communicate with external devices.
W464 Describes operating procedures for the CX-Inte-
grator Network Configuration Tool for CS-, CJ-,
CP-, and NSJ-series Controllers.
W463 Installation and overview of CX-One FA Inte-
grated Tool Package.
Contents
xxxi