Omron CJ - 09-2009 Operation Manual page 595

Specifications of Basic I/O Units
CJ1W-ID262 DC Input Unit (MIL Connectors, 64 Points)
Circuit Configuration
Rated Input Voltage
Rated Input Voltage Range
Input Impedance
Input Current
ON Voltage/ON Current
OFF Voltage/OFF Current
ON Response Time
OFF Response Time
Number of Circuits
Number of Simultaneously ON
Points
Insulation Resistance
Dielectric Strength
Internal Current Consumption
Weight
Accessories
5.6 kΩ
to
1000 pF
to
Input indicator
5.6 kΩ
to
1000 pF
to
Number of Simultaneously ON Points vs.
Ambient Temperature Characteristic
64 points 64 points 64 points
at 25°C at 35°C at 47°C
Input voltage: 24 V DC
Input voltage: 26.4 V DC
Ambient Temperature
24 V DC
20.4 to 26.4 V DC
5.6 kΩ
4.1 mA typical (at 24 V DC)
19.0 V DC min./3 mA min.
5 V DC max./1 mA max.
8.0 ms max. (Can be set to between 0 and 32 in the
PLC Setup.)
8.0 ms max. (Can be set to between 0 and 32 in the
PLC Setup.)
64 (16 points/common, 4 circuits)
50% (8 points/common) (at 24 V DC) (Refer to the
following illustrations.)
20 MΩ between external terminals and the GR ter-
minal (100 V DC)
1,000 V AC between the external terminals and the
GR terminal for 1 minute at a leakage current of
10 mA max.
5 V DC: 90 mA max.
110 g max.
None
560 Ω
Indicator
switching
circuit
560 Ω
Input voltage: 20.4 V DC
12 points/common
(total: 45 points) at 55°C
8 points/common at 55°C
8 points/common
(total: 26 points max.) at 55°C
Appendix A
547