A-6 Version Information; A-6-1 Version Information For Nx-Series Ai Controllers; A-6-2 Version Information For Ny-Series Ai Controllers; Specifications When Not Using The Sysmac Studio Version That Corresponds To The Unit Version Of The Ai Contoller - Omron NX Series User Manual

Appendices

A-6 Version Information

This section describes the relationship between the unit versions of AI Controllers and each software
version.
A-6-1
Version Information for NX-series AI Controllers
This following table gives the relationship between the unit versions of NX-series AI Controllers and
the corresponding versions for each software.
Unit version of AI Controller
*1
Ver.1.21
Ver.1.18
*1. There is no NX-series AI Controller with unit version 1.19 or later and unit version earlier than 1.21.
A-6-2 Version Information for NY-series AI Controllers
This following table gives the relationship between the unit versions of NY-series AI Controllers and
the corresponding versions for each software.
Unit version of AI
Controller
*1
Ver.1.21
Ver.1.18
*1. There is no NY-series AI Controller with unit version 1.19 or later and unit version earlier than 1.21.
A-6-3
Specifications When Not Using the Sysmac Studio Version That
Corresponds to the Unit Version of the AI Contoller
The specifecations when you do not use the Sysmac Studio version that corresponds to the unit ver-
sion of AI Controller are given in this section.
Using Sysmac Studio Version 1.24 or Lower
You cannot use the AI Controller with Sysmac Studio version 1.24 or lower.
Using a Lower Version of Sysmac Studio
If you use a lower version of the Sysmac Studio, you can use only the functions of the unit version of
the AI Controller that corresponds to the Sysmac Studio version.
Example: Unit version of AI Controller: 1.21
Sysmac Studio version: 1.25
A-38
Corresponding version of Sys-
mac Studio
Ver.1.29
Ver.1.25
Version of the AI
Corresponding
Controller soft-
version of Sysmac
ware (AI Operator,
Studio
AI Viewer)
Ver.1.29 Ver.1.00
Ver.1.25 Ver.1.00
NX/NY-series Artificial Intelligence Machine Automation Controller User's Manual (W594)
Version of the AI Controller soft-
ware (AI Operator, AI Viewer)
Ver.1.00
Ver.1.00
Industrial PC Sup- Rescue Disk Crea-
port Utility
Ver.1.1.1545 Ver.1.1.2004.01000
00040
Ver.1.1.1541.0 Ver.1.1.2004.01000
00040
tor