Bose ControlSpace ESP-880 Service Manual page 5

Front Panel LED Indicators
Power LED Indicates power or fault state.
• Green: Power on
• Red: Fault error
Signal LED A general signal status indicator for all input and output channels.
• Green: Normal Signals on all channels
• Red: Clipping found on one or more channels. Connect using ControlSpace
software for channel signal lever detail
Ethernet LED Indicates the connection status of the Ethernet control network.
Operating speed: 10BASE-T
• Green: Link established
• Yellow: Tx activity
• Red: Rx activity
Serial LED Indicates RS-232 or CC-64 serial command status. Does not indicate Serial over
Ethernet activity.
• Green: RS-232 Rx/Tx activity
• Yellow: CC-16 controller command received
• Red: CC-16 controller command transmitted
Product Features:
• ®
Bose ControlSpace ESP-880/1240/4120/1600 engineered sound processors offer three
analog I/O options with an open DSP architecture. ESP-1600 has 16 analog inputs and digital
outputs, either 8 channels via the ESPLink jack or 16 via a plug-in digital output card.
• These single-rack unit models with different analog I/O options can more closely fit the
requirements of both standalone and networked processing applications.
•
High-quality analog circuitry offers both mic and line I/O, operates with ultra-low noise and
> 113 dB dynamic range.
•
Advanced digital signal processing converts audio at 48 kHz sample rate/24-bit, uses a
floating-point open architecture DSP, and operates at low latencies for sound system
precision.
•
Front panel RJ-45 Ethernet connection enables localized configuration and control network
access.
•
Expansion Card Slot supports the use of accessory networking cards, allowing digital audio
to be sent and/or received from other products and systems.
• Dante™ and AVB media networking cards allow the single-rack ESP products to closely
integrate with Bose or other manufacturer's products and systems.
•
Control and audio together on a single network cable. When using the accessory Dante and
AVB network cards, all four ControlSpace ESP models utilize a single Ethernet network for
both audio and control data, eliminating the need for two separate networks.
• A full suite of signal processing algorithms. Bose ControlSpace Designer software version
4.0 offers a large set of signal processing modules for Bose networked ESP products such
as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker EQ
libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source
selectors and delays.
•
Built-in Bose ESPLink output. Single-rack unit ESP models have integrated ESPLink optical
outputs for sending up to 8 channels of uncompressed digital audio to ESPLink-equipped
Bose PowerMatch
PRODUCT DESCRIPTION
® amplifiers.
5
® Designer TM