Ipoa Ifconfig - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

ipoa ifconfig

Configure an IPoA interface.
SYNTAX:
ipoa ifconfig
intf
[dest]
[qos]
[encaps]
[retry]
EXAMPLE:
=>ipoa iflist
IPoA_PVC1 : dest : Br4
Retry : 10
Connection State : connected
=>ipoa ifconfig intf=IPoA_PVC1 encaps=llc/snap retry=15
=>ipoa iflist
Moreipoa : dest : Br4
Retry : 15
Connection State : connected
RX bytes: 0
TX bytes: 0
=>
E-SIT-CTC-20021203-0003 v1.0
intf = <IPoA_PVC>
[dest = <intfname>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[retry = <number {0-65535}>]
The name of the Routed IPoA interface to configure.
The destination for this interface. Typically a phonebook entry.
This parameter needs only to be specified in case of an interface created
without specified destination.
The name of a configured Quality Of Service book entry.
If not specified, the default Quality Of Service book entry will be used.
The type of encapsulation to be used for this bridge interface.
Choose between:
llc/snap
•
vcmux
•
A number between 0 and 65535.
Represents the number of Wide Area Network (WAN) connection setup
retries before giving up.
By default the retry value is 10.
QoS : default
QoS : default
frames: 0
frames: 0
Encaps : llc/snap
Encaps : llc/snap
dropframes: 0
IPoA Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
Fcs : off
Fcs : off
181