Ppp Iflist - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

ppp iflist

Show current configuration of all or a specified Routed PPP(oA/oE) interface(s).
SYNTAX:
ppp iflist
intf
EXAMPLE INPUT/OUTPUT :
=>ppp iflist
PPP1: dest : PPP1
Retry: 10 QoS
mode = IP Routing
flags = echo magic
trans addr = pat
route = 0.0.0.0/0 - 0.0.0.0/0 (metric 0)
user name = guest
admin state = down
LCP: state = initial
IPCP: state = initial
PPP2: dest : PVC2
Retry: 10 QoS
mode = IP Routing
flags = echo magic
mru = 1500
user name = password =
admin state = down
LCP: state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
ppp ifadd
ppp ifattach
ppp ifconfig
ppp ifdelete
ppp ifdetach
E-SIT-CTC-20021203-0003 v1.0
[intf = <intfname>]
The name of the Routed PPP(oA/oE) interface.
If this parameter is not specified, all Routed PPP(oA/oE) interfaces are
shown.
default encaps
accomp restart mru
mru = 1500
password = ********
oper state = down
retransm = 10
retransm = 0
default encaps
accomp restart mru
oper state = down
retransm = 10
retransm = 0
Create a Routed PPP(oA/oE) interface.
Attach a Routed PPP(oA/oE) interface.
Configure a Routed PPP(oA/oE) interface.
Delete a Routed PPP(oA/oE) interface.
Detach a Routed PPP(oA/oE) interface.
VC-MUX
addr route savepwd
link state = not-connected
term. reason =
term. reason =
VC-MUX
addr savepwd PPPOA
link state = not-connected
term. reason =
term. reason =
PPP Commands
OPTIONAL
PPPOA
233