Phonebook Add - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

Phonebook Commands

phonebook add

Add a phonebook entry.
SYNTAX:
phonebook add
name
addr
type
212
name = <string>
addr = <[port.]vpi.vci>
type = <{any|ethoa|pppoa|ipoa}>
A free to choose phonebook name for the destination.
Two limitations apply:
The name of a phonebook entry intended for the Relayed PPPoA
•
(PPPoA-to-PPTP Relaying) packet service may not start with capital
P or capital T
The name of a phonebook entry intended for the PPP-to-DHCP
•
spoofing packet service must start with DHCP, e.g.
'DHCP_Spoof01'.
The ATM address for this destination.
It is composed of a Virtual Path Identifier (VPI) and a Virtual Channel
Identifier (VCI) identifying ATM virtual channels.
In most cases the values are provided by the Service Provider.
Accepted VPI: a number between 0 and 15
Accepted VCI: a number between 0 and 511.
The Connection Service supported by the destination.
Choose between:
any (All Packet Services)
•
ethoa (Bridged Ethernet, Routed Ethernet, Bridged PPPoE, Routed
•
PPPoE)
pppoa (Routed PPPoA and Relayed PPPoA)
•
ipoa (Classical IPoA and Routed IPoA).
•
REQUIRED
REQUIRED
REQUIRED
E-SIT-CTC-20021203-0003 v1.0