THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual page 17

The Help Command
Execute help or ? from top level to list all available command groups for the SpeedTouch
EXAMPLE for the SpeedTouch
=>help
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
Following command groups are available :
adsl atmstats
dhcp dns
ip mer
ppp pptp
td wireless
=>
You can execute the help or ? command from each command group selection. This results in a list of the available
commands (and nested command groups, if available) in this particular command group.
EXAMPLE:
=>firewall
[firewall]=>
[firewall]=>?
Following commands are available :
tron : Enables verbose console messaging.
troff : Disables verbose console messaging.
match : Defines an ip packet match.
assign : Assign a chain to an entry point.
list : Shows a list of all the hooks with the chain attached.
flush : Clears all hooks. If a hook is provided, that hook is cleared.
Following command groups are available :
chain rule
[firewall]=>
As both help and ? have the exact same functionality in the SpeedTouch
be equally replaced by the ? command.
Executing e.g. help firewall from top level gives the same result as executing help from the firewall command group
selection.
E-SIT-CTC-20021203-0003 v1.0
TM
570:
bridge
env
nat
qosbook
cip config
eth firewall
password phonebook
software system
TM
500Series CLI, the help command may always
TM
500Series.
13