Upnp List - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

UPnP Commands

upnp list

This command lists the devices and services currently offered by the SpeedTouch
whether a PPP connection is properly configured and thus advertised as a PPP connection.
SYNTAX:
upnp list
verbose
EXAMPLE:
=>upnplist
---------------- device: IGD.xml ------------
++ Root Device: urn:schemas-upnp-org:device:InternetGatewayDevice:1
-- Sub-device 1: urn:schemas-upnp-org:device:LANDevice:1
-- Sub-device 2: urn:schemas-upnp-org:device:WANDevice:1
-- Sub-device 3: urn:schemas-upnp-org:device:WANConnectionDevice:1
-- Service 1: urn:upnp-org:serviceId:layer3f
-- Service 2: urn:upnp-org:serviceId:lanhcm
-- Service 3: urn:upnp-org:serviceId:wancic
-- Service 4: urn:upnp-org:serviceId:wandsllc:pppoa
-- Service 5: urn:upnp-org:serviceId:wanpppc:pppoa
---------------------- end -----------------
=>
RELATED COMMANDS:
upnp flush
upnp config
272
[verbose = <number{0-2}>]
Verbose level. Default is 1.
Flushes the upnp configuration (i.e. reset to default configuration).
Configure upnp parameter(s).
TM
. E.g. use this command to check
OPTIONAL
E-SIT-CTC-20021203-0003 v1.0