Menu-Driven Cli Navigation - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

Menu-driven CLI Navigation

TM
To improve the user-friendliness of the SpeedTouch 500Series CLI, the CLI features a menu-driven interface.
To enter the menu-driven interface, simply execute menu from the CLI prompt:
TM
EXAMPLE (for the SpeedTouch 510):
The semi-graphical CLI offers you an attractive and easy-to-use configuration environment for the CLI.
You can browse through the CLI command groups via the ARROW keys. Press ENTER to execute your selection. From
each level you can select '..' to go back one level up.
Use the TAB key to change from the CLI command menu to the control menu and vice versa.
To setup a CLI command, simply press ENTER on its name. You can configure and overview its various parameters at
one time. In case the parameter provides preset values, you can go through these via the ARROW keys. If you are satis-
fied, use the TAB key to go to the OK field and press ENTER.
Do not forget to save your changes by executing saveall (from any CLI prompt).
Note
E-SIT-CTC-20021203-0003 v1.0
19