Dhcp Client Ifattach - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

DHCP Commands

dhcp client ifattach

Attach a DHCP lease to a dynamic interface.
Create the interface first with :dhcp client ifadd.
Note
SYNTAX:
dhcp client ifattach
intf
EXAMPLE:
=>dhcp client iflist
NewMer : [INIT]
flags=
IP address
HW address
DHCP server
Number of leases: 1
Total size of table: 19,
=>dhcp client ifattach intf=NewMer
=>dhcp client iflist
NewMer : [SELECTING]
flags=
IP address
HW address
DHCP server
hostname
req.leasetime
trying to get a lease for 8 min, 32 sec
transmission of DISCOVER in 57 sec
retransmission timeout: 64
nbr of retransmissions: 14
Number of leases: 1
Total size of table: 19,
=>
RELATED COMMANDS:
dhcp client ifadd
dhcp client ifconfig
dhcp client ifrelease
dhcp client iflist
72
intf = <interface name>
The name of the dynamic interface.
uc
: 0.0.0.0
: 00:90:d0:01:47:de
: 255.255.255.255
in use: 1, free: 94 %
uc
: 10.0.0.10
: 0:90:d0:01:47:de
: 255.255.255.255
: NewLease
= 10800 s
in use: 1, free: 94 %
Create a DHCP lease for a specific interface.
Configure a DHCP lease created for a specific interface.
Release a lease attached to a dynamic interface.
Show all dynamic interfaces.
REQUIRED
E-SIT-CTC-20021203-0003 v1.0