Nat Applist - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

NAT Commands

nat applist

List available Network Address and Port Translation (NAPT) protocol helpers.
Certain protocols are 'sensitive' to NAPT in that they do not function properly when dealing with it. This list shows
which 'NAPT-sensitive' applications are supported on the SpeedTouch
TM
Touch on this matter.
SYNTAX:
nat applist
EXAMPLE OUTPUT:
=>nat applist
Application Proto
GRE gre
PPTP tcp
ESP 50
IKE udp
SIP udp
ILS tcp
H245 tcp
H323 tcp
RAUDIO(PNA) tcp
RTSP tcp
IRC tcp
FTP tcp
=>
RELATED COMMANDS:
nat bind
nat bindlist
nat unbind
198
DefaultPort
1 INCOMING
1723 OUTGOING INCOMING
1 OUTGOING INCOMING
500 OUTGOING INCOMING
5060 OUTGOING INCOMING
0 OUTGOING
0 OUTGOING INCOMING
1720 OUTGOING INCOMING
7070 OUTGOING
554 OUTGOING
6667 OUTGOING
21 OUTGOING
Create a new helper/port binding.
List current NAPT helper/port bindings.
Delete an existing helper/port binding.
TM
, i.e. the inherent knowledge of the Speed-
E-SIT-CTC-20021203-0003 v1.0