Power Cable Types; Preferred Power Cable Types - ABB ACS180-04S-03A7-1 Hardware Manual

46 Guidelines for planning the electrical installation
￭

Power cable types

Preferred power cable types

This section shows the preferred cable types. Make sure that the selected cable
type also complies with local/state/country electrical codes.
Cable type
Symmetrical shielded (or ar-
mored) cable with three
phase conductors and con-
centric PE conductor as
shield (or armor)
Symmetrical shielded (or ar-
mored) cable with three
phase conductors and sym-
metrically constructed PE
conductor and a shield (or
armor)
Symmetrical shielded (or ar-
mored) cable with three
phase conductors and a
shield (or armor), and separ-
ate PE conductor/cable
1) A separate PE conductor is required if the conductivity of the shield (or armor) is not sufficient for the
PE use.
Use as input power cabling
PE
Yes
Yes
PE
Yes
PE
1)
Use as motor cabling and as
brake resistor cabling
Yes
Yes
Yes