To Replace The Cooling Fan For Frame Size R2 - ABB ACS180-04S-03A7-1 Hardware Manual

of the drive. As shown in the following figure, the side with the fan power cable
is aligned to the double bars sign on the fan cover.
6
7. Connect the fan power cable.
7
8. Carefully put the fan cover into position in the drive. Make sure that the fan
power cable is routed correctly. Push the cover to lock into position.
8
￭

To replace the cooling fan for frame size R2

WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
Maintenance 89