Table of Contents
Advertisement
￭
Connection procedure
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
Refer to
Terminal data for the power cables (page 125)
1.
Do the steps in section
the work.
2. Install the grounding plate and fasten it with screw.
R0
R1
Electrical safety precautions (page 16)
M4x16, 2x
M3×10, 2x
Electrical installation 69
for the tightening torques.
before you start
Advertisement
Table of Contents
