Contents Of The Configuration Table; Configuration Table - Fronius PT-Drive Operating Instructions Manual

Configuration table

Contents of the The table shown below includes the following information:
configuration -
table
-
-
-
Configuration Filler metal
Material
table
AlSi5/Al99.5
AlSi5/Al99.5
AlSi5/Al99.5
AlSi5/Al99.5
AlMg5
AlMg5
AlMg5
AlMg5
CuSi/Steel/CrNi
CuSi/Steel/CrNi
Filler metal
Material and diameter of the welding wire
PPU variant
Number of the respective variant of the PT Drive for push-pull alignment
PT Drive
Colour of the respective pressure spring
Max. possible wirefeed speed in conjunction with PT Drive
4-roller drive of the wirefeeder being used
Scale value ("4R") for the contact pressure on the clamping levers
Groove-shape of the feed rollers
PPU variant
Wire diameter PT Drive
0,8 mm (.030 in.)
1,0 mm (.040 in.)
1,2 mm (.045 in.)
1,6 mm (1/16 in.)
0,8 mm (.030 in.)
1,0 mm (.040 in.)
1,2 mm (.045 in.)
1,6 mm (1/16 in.)
1,0 mm (.040 in.)
1,2 mm (.045 in.)
22
PT Drive
Pressure Wirespeed feed
spring
50 blue 15 m/min (591 ipm)
51 blue 18 m/min (709 ipm)
52 blue 22 m/min (867 ipm)
53 white 22 m/min (867 ipm)
50 red 15 m/min (591 ipm)
51 red 18 m/min (709 ipm)
52 red 22 m/min (867 ipm)
53 blue 22 m/min (867 ipm)
59 noir 20 m/min (788 ipm)
60 noir 22 m/min (867 ipm)
4-roller drive
Scale Groove
value shape
1 H
1 H
1 H
1,5 H
1 H
1 H
1 H
1,5 H
2-3 H
2-3 H