More Configuration Options - Fronius TWIN Push Operating Instructions Manual

(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
*
**
More configura- Single wire application
tion options
+ TU podium (screwed in place)
HP 95i CON /G /10 m interconnecting hosepack
Welding wire drum 2
Welding wire drum 1
Depending on the application, two WFi R REEL unwinding wirefeeders can
be used additionally for optimal wirefeeding.
OPT/i WF Tower
+ Mounting WF Twin Tower (12a)
TWIN wirefeeder WF 30i R /TWIN
+ OPT/i WF TWIN PushPull
MHP 2x450i RD/W/FSC (with TWIN drive unit WF 60i TWIN Drive)
+ Toothed pressure roller CMT
+ Fixing bracket
Wirefeeding hose 1
WF 30i R /TWIN - Wire buffer 1
Control cable wire buffer 1
Wirefeeding hose 2
WF 30i R /TWIN - Wire buffer 2
Control cable wire buffer 2
Robot
Robot support Y-piece **
TWIN wire buffer set *
(required for TWIN CMT applications)
CrashBox /d TWIN
MTB 2x500i PA welding torch
+ OPT/i MTB 11.5° sym.
Robacta TSS /i welding torch service station
Instead of mounting the wire buffers on the side of the robot, they can
also be suspended from a balancer.
The balancer mounting Y-piece can also be used instead of the robot sup-
port Y-piece.
31