Waiting Time Until The Power Connection Is Established - Fronius Virtual Welding 2.0 Operating Instructions Manual

Danger from falling tool table.
Personal injury and damage to property may result.
▶
Waiting time un-
til the power
connection is es-
Risk of poor acclimatization of components by connecting the device to the grid
tablished
too early
This can result in damage to the device.
▶
38
CAUTION!
Always make sure the tool table is locked in the brackets (10) and (11) as
shown above.
CAUTION!
Do not connect the device to the grid and switch it on until 4 hours after the
setup has been completed.