License Management; Function; Opening License Management; Installing A License - Fronius Virtual Welding 2.0 Operating Instructions Manual

License management

Function

System-relevant information is displayed in license management, such as:
-
-
-
Additional Virtual Welding licenses can also be installed in license management,
for example to enable additional welding processes.
Opening license
1
management
2
3
4
Installing a li- Once a new license has been purchased, it will be sent to the customer by the
cense specialist dealer.
1
2
3
4
Hardware-Dongle serial number
Installed licenses
etc.
With the NFC key, touch the sensor on the Virtual Welding system to open
terminal management
- For the position of the sensor, see section
page 23
(1)
Select button (1)
Select tab (2)
Select button (3)
- License information is displayed
Save the new license to a USB thumb drive
Connect the USB thumb drive to the USB port of the Virtual Welding system
Open license management (see previous section)
Confirm the displayed message
- This will install and activate the new license
Touch screen and sensor
(2)
(3)
on
99