Installing The Mobilecase; Safety; Setting Up The Mobilecase, Mounting The Tool Table - Fronius Virtual Welding 2.0 Operating Instructions Manual

Installing the MobileCase

Safety

Danger from electrical current.
This may result in serious injuries or death.
► Before starting work, switch off the device and disconnect it from the mains.
► Secure the device to prevent it from being switched back on again.
Danger from incorrect installation.
This can result in severe personal injury and damage to property.
► Observe the information in section
Setting up the
MobileCase,
mounting the tool
table
WARNING!
WARNING!
Setup regulations from page 31.
Remove the MobileCase and the tool
1
table from the transport case
Place the MobileCase in the desired
2
position
39