Adjusting The Side Panels; Adjusting The "Standard" And "Clothing Guard" Side Panels - Otto Bock Avantgarde 4 Instructions For Use Manual

Hide thumbs Also See for Avantgarde 4:

Table of Contents

2) Depth adjustment:Loosen and remove the Allen head screw on the posterior lower leg pad: (see fig. 66,

item 1). Move the posterior lower leg pad to one of the 4 possible positions (see fig. 66, item 2) and firmly

retighten the Allen head screw.

3) Angle adjustment: Loosen the Allen head screw on the posterior lower leg pad (see fig. 67, item 1). Set the

desired angle and firmly retighten the Allen head screw.

4) Width adjustment: Loosen the Allen head screws on the posterior lower leg pad (see fig. 68, item 1). Slide

the posterior lower leg pad to the desired position (see fig. 68, item 2) and firmly retighten the Allen head

screws.

6.8 Adjusting the side panels

If the drive wheel position is changed, fine adjustment of the side panels is necessary. The clothing protector (see

fig. 69) can be adjusted continuously to the position of the drive wheels.

1) Remove the drive wheel.

2) Loosen the mounting screw between the side panel and slide block (see fig. 70, items 1/2).

3) Loosen the bolt in the adjustment groove of the backrest tube from the inside (see fig. 71).

4) If necessary, slightly loosen the slide block on the bottom of the frame (see fig. 72).

5) Unscrew and remove the cover from the adjustment disc (see fig. 73).

6) Push on the drive wheel to determine the position.

7) Adjust the position:

→ Front: align the correct hole on the adjustment disc with the mounting point on the slide block (see fig. 74,

item 1).

→ Drive: Adjust the angle (see fig. 71).

→ Slide block: If necessary, adjust the depth position (see fig. 74, item 2).

8) Screw on the cover of the adjustment disc (see fig. 73). The marks on the disc help to find the position.

Ensure that the side panel can be fastened to the slide block through the cover (see fig. 74, item 3).

9) Securely retighten all the screws.

10) Push on the drive wheel and ensure that it can rotate freely.

→ After adjustment of both side panels, both drive wheels must rotate freely without scraping noises.

Avantgarde 4

Settings

Table of Contents