Expanding And Assigning Parameters To The Device; Open The Device - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Expanding and assigning parameters to the device

7.1

Open the device

Requirement
• You are familiar with the important safety instructions under "Safety instructions on
device and system extensions (Page 50)".
• The device is fully disconnected from the mains voltage, see "Switching off the device
(Page 72)".
• Screwdriver TORX T10
Procedure
1. Unplug all connecting cables.
2. Open the front panel. (Page 74)
3. Unscrew the locking screw of the enclosure cover ①.
4. Push the enclosure cover back.
5. Lift up and remove the enclosure cover.
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
7
77