Connecting The Device To Networks - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

4.5

Connecting the device to networks

The following options are available for integrating the device into existing or planned system
environments and networks.
Ethernet
Wake on LAN and Remote Boot are supported.
You can use the integrated Ethernet interfaces for communication and data exchange with
automation devices, e.g. SIMATIC S7.
You need the "SOFTNET S7" software package for this.
PROFINET
PROFINET can be operated via:
• All Ethernet interfaces on the device (RT)
SIMATIC NET
Use this software package to create, operate and configure an innovative network for Field &
Control level. Additional information is available under SIMATIC NET
(http://w3.siemens.com/mcms/automation/en/industrielle-
kommunikation/Seiten/Default.aspx).
The software package and the documentation are not included in the scope of supply.
More information
You can find additional information on the Internet at: Technical support
(https://support.industry.siemens.com)
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
Connecting the device
4.5 Connecting the device to networks
69