Connecting Several Monitors (Multi-Monitoring); Connecting Monitors For Using The Nvidia T400 Graphics Card - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

4.4.3

Connecting several monitors (multi-monitoring)

4.4.3.1

Connecting monitors for using the NVIDIA T400 graphics card

Power supply units
The NVIDIA T400 graphics card can be operated with the following power supply units:
• Power supply unit 550 W:
Connection sockets on the rear of the device
As standard, there are three connection sockets on the rear of the device for connecting
monitors to the integrated graphics interfaces.
• 2 x DP (DisplayPort; labeling on the device: DPP1, DPP2)
• DVI-D
You will find 3 additional connection sockets on the rear of the device for connecting
monitors to the optional NVIDIA T400 graphics card.
• 3 x mDP (Mini DisplayPort)
At these connection sockets, you can use adapters to connect monitors to other graphics
ports.
You can find information on the connection sockets on the rear of the device under:
"Connections on the rear of the device (Page 24)".
You can find information on the adapters under "Hardware accessories (Page 33)".
Connection socket on mon-
itor
Monitor 1 DP (Display-
Port)
DVI
VGA
Monitor 2 DP (Display-
Port)
DVI
VGA
Monitor 3 DP (Display-
Port)
DVI
VGA
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
Connection socket on the integrated
graphics interfaces
DP DP
(DPP1; X71) (DPP2; X72)
1
X
X
2)
X
2)
X
X
2)
X
2)
Connection socket on the NVIDIA T400
DVI-D mDP1
(X70)
1 1
X
Connecting the device
4.4 Connecting I/O devices
graphics card
mDP2 mDP3
67