Technical Specifications Of The Connections; Technical Specifications Of The Connections On The Device - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

9.9

Technical specifications of the connections

9.9.1

Technical specifications of the connections on the device

See the note in "Applicability of technical specifications (Page 128)".
Note
Detailed information on the position of the connections is available in "Device ports
(Page 23)".
Connec- Description
tion socket
COM1 COM:
• Serial interface (RS232/422/485)
• D-sub socket connector
• V.24
COM2 COM:
COM3
• Serial interface (standard: RS-232)
• D-sub socket connector
• V.24
DP DisplayPort (labeling on the device: DPP)
An analog monitor can be used with an adapter cable (optional).
• Connection for monitors with DisplayPort connector
• Connection for monitors with VGA connector via DP-VGA
adapter,
See Hardware accessories (Page 33)
• Connection for monitors with DVI connector via DP-DVI-D
adapter,
See Hardware accessories (Page 33)
DVI-D DVI-D:
• Connection for monitors with DVI-D connector
Monitors with a DVI-D connector can also be connected to the
DPP connection socket using an adapter.
USB Type A USB Type A:
• High-current
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
Technical specifications
9.9 Technical specifications of the connections
Assignment
9-pin
(±12 V)
9-pin
(±12 V)
20-pin
(3.3 V; 500 mA)
24-pin
(5 V; 500 mA)
5 V
137