Technical Specifications Of The Connectors For The Power Supply Of Graphics Cards - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Technical specifications
9.9 Technical specifications of the connections
Connec- Description
tion socket
USB Type C USB Type C:
• High-current
LAN 1 Intel® I219-V
• Connection for Ethernet with RJ45 plug
• The LAN ports are numbered on the enclosure. The numbering
by the operating system may differ from this.
• Data transmission rate: 10/100/1000 Mbps
• Wake on LAN, remote boot
LAN 2 Intel® I210-AT
• Connection for Ethernet with RJ45 plug
• The LAN ports are numbered on the enclosure. The numbering
by the operating system may differ from this.
• Data transmission rate: 10/100/1000 Mbps
• Wake on LAN, remote boot
Audio
• Connection for 3.5 mm audio stereo jack:
Realtek ALC887, 8-channel DAC support
Line IN (light blue)
–
Headphone OUT (lime)
–
(max. 2 W at 4 Ω)
Microphone IN (pink)
–
9.9.2 Technical specifications of the connectors for the power supply of graphics
cards
See the note in "Applicability of technical specifications (Page 128)".
6-pin connector for graphics cards
Description
Connector on the wiring harness of the 550 W power supply unit
138
Assignment
5 V; 1.5 A; up to 10 Gbps
8-pin
RJ45
(up to 1 Gbps)
1: Ground
2: Audio links
3: Audio right
Assignment
1 = +12 V
2 = +12 V
3 = +12 V
4 = GND
5 = GND
6 = GND
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA