Drives In 5.25" Slots Of Drive Cages; 2.5" Drive Or 3.5" Drive In The 5.25" Mounting Frame With Removable Tray - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Expanding and assigning parameters to the device
7.6 Installing and removing drives in drive cages
7.6.5

Drives in 5.25" slots of drive cages

7.6.5.1

2.5" drive or 3.5" drive in the 5.25" mounting frame with removable tray

You can install 2.5" or 3.5" drives in the 5.25" mounting frame for removable trays with drive
cage type A.
5.25" mounting frame with removable tray
You can find information on the slot here:
• Drive cage type A (Page 17)
• Installation options for drives with drive cage type A (Page 91)
Only use original spare parts or components approved for this device. You can find
information on this under "Hardware accessories (Page 33)".
Requirement
• You are familiar with the important safety instructions under "Safety instructions on
device and system extensions (Page 50)".
• The device is fully disconnected from the mains voltage, see "Switching off the device
(Page 72)".
• Screwdriver TORX T10
102
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA