Removing And Installing Hardware; Front Fan Maintenance; Removing The Fan Cover From The Front Fan; Changing The Filter Mat Of The Front Fan - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Device maintenance and repair

8.3 Removing and installing hardware

8.3 Removing and installing hardware
8.3.1

Front fan maintenance

8.3.1.1

Removing the fan cover from the front fan

Information on the position of the fan cover of the front fan is available under "Front panel
(Page 15)".
Procedure
1. Open the front door (Page 74) to
at least an angle of approx. 45°
2. Take hold of the recessed grip of
the fan cover ①.
3. Open the fan cover in the
direction of the arrow and remove
it.
8.3.1.2

Changing the filter mat of the front fan

Replace or clean the filter mat of the front fan at regular intervals. You can find information
on this under "Maintenance intervals (Page 115)".
Only use original spare parts or components approved for this device. You can find
information on this under "Hardware accessories (Page 33).
Procedure
1. Remove the fan cover (Page 116).
2. Remove the filter mat from the fan cover.
3. Insert the new filter mat loosely into the fan cover. Place the filter mat evenly in the fan
cover.
4. Replace the fan cover.
116
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA