Operating The Device; Opening The Front Door; Multi-Monitoring - Siemens SIMATIC IPC647E Operating Instructions Manual

Operating the device

5.1

Opening the front door

Procedure
1. Open the front door with the key.
2. Pull the front door to the side.
See also
Notes on device and system extensions (Page 40)
5.2

Multi-monitoring

You can operate several monitors on one device at the same time. Read the information in
the corresponding section under "Connecting I/O devices (Page 53)".
Note
Information on graphics cards which support multi-monitoring can be obtained from your
local representative, see "Service and support (Page 185)".
Procedure
1. Install a suitable graphics card, see "Graphics card (Page 100)".
2. Configure the function "Multi-monitoring" in the firmware settings of the device. You can
find information on this in the detailed firmware/BIOS description, see "Important
instructions and manuals for operating the device (Page 11)".
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
5
61