Supermicro FatTwin AS -F1114S-FT User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Server
  5. FatTwin AS -F1114S-FT
  6. User manual

Supermicro FatTwin AS -F1114S-FT User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FatTwin
®
AS -F1114S-FT
USER'S MANUAL
Revision 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FatTwin AS -F1114S-FT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Supermicro FatTwin AS -F1114S-FT

Summary of Contents for Supermicro FatTwin AS -F1114S-FT

  • Page 1 FatTwin ® AS -F1114S-FT USER’S MANUAL Revision 1.0...
  • Page 2 State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
  • Page 3 About this Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the FatTwin AS -F1114S-FT. Installation and maintenance should be performed by experienced technicians only. Please refer to the AS -F1114S-FT server specifications page on our website for updates on supported memory, processors and operating systems (http://www.supermicro.com).

  • Page 4: Table Of Contents

    Preface Contents Chapter 1 Introduction 1.1 Overview ..........................8 1.2 Unpacking the System ......................8 1.3 FatTwin: System Notes ......................9 Nodes ..........................9 System Power ........................9 1.4 System Features ........................10 1.5 Server Chassis Features ....................11 Node Controls ........................11 Front Features ........................12 Rear Features ........................13 1.6 Motherboard Layout ......................13 Quick Reference Table ......................15 Chapter 2 Server Installation...
  • Page 5 FatTwin AS -F1114S-FT User's Manual Chapter 3 Maintenance and Component Installation 3.1 Removing Power ........................24 3.2 Chassis Components ......................25 Installing and Removing the Node Drawers ..............25 Removing Nodes from the Chassis ................26 Removing the Cover from the Node................26 Nodes and Associated Hard Drives ..................27 Installing and Removing 2.5"...
  • Page 6 Preface Chapter 5 Software 5.1 Microsoft Windows OS Installation ..................57 5.2 Driver Installation ........................59 5.3 SuperDoctor 5 ........................60 ® 5.4 IPMI ............................61 BMC ADMIN User Password ....................61 Chapter 6 UEFI BIOS 6.1 Introduction .........................62 Starting the Setup Utility ....................62 6.2 Main Setup .........................63 6.3 Advanced ..........................65 6.4 IPMI ............................82 6.5 Event Logs .........................85...
  • Page 7 FatTwin AS -F1114S-FT User's Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 8: Overview

    FatTwin AS -F1114S-FT User's Manual Chapter 1 Introduction 1.1 Overview This chapter provides a brief outline of the functions and features of the AS -F1114S-FT. The AS -F1114S-FT is based on the H12SSFF-AN6 motherboard and the CSE-F418IF4-R2K20BP chassis. This FatTwin system features eight motherboard tray nodes in the chassis.

  • Page 9: Fattwin: System Notes

    Chapter 1: Introduction 1.3 FatTwin: System Notes As a FatTwin configuration, the FatTwin AS -F1114S-FT is a unique server system. With eight system boards incorporated into a single chassis acting as eight separate nodes, there are several points you should keep in mind.

  • Page 10: System Features

    FatTwin AS -F1114S-FT User's Manual 1.4 System Features The following table provides you with an overview of the main features of the AS -F1114S-FT. Please refer to Appendix C for additional specifications. System Features Motherboard H12SSFF-AN6 Chassis CSE-F418IF4-R2K20BP Dual AMD EPYC™ 7002 Series processors...

  • Page 11: Server Chassis Features

    Chapter 1: Introduction 1.5 Server Chassis Features Node Controls Each node has a power button and UID LED located with I/O ports on the front of the node. See Chapter 4 for details on the node controls. Figure 1-1. Node Controls Node Controls Item Feature...

  • Page 12: Front Features

    FatTwin AS -F1114S-FT User's Manual Front Features The CSE-F418IF4-R2K20BP is a 4U chassis with eight hot-swap server nodes. See the illustration below for the features included on the front of the chassis. Figure 1-2. System Front View Front System Features...

  • Page 13: Rear Features

    Chapter 1: Introduction Rear Features The illustration below shows the features included on the rear of the chassis. Figure 1-3. System Rear View Rear System Features Item Feature Description Power Supply Four (4) redundant 2200W or 2000W power supplies The chassis has eight rear fans for cooling. These are hot-swappable Rear Fan and can be replaced without powering down the system.
  • Page 14 FatTwin AS -F1114S-FT User's Manual IPMI_LAN JUSB1 LED2 LEDM1 LED3 JCOM1 UID_LED1 TPM/Port 80 JCPLD1 NCSI Battery JWD1 AIOM JIPMB1 JSXB2 JBT1 LED5 I-SATA0 PB_MISC LED4 M.2 HC2 M.2 HC1 HDD_PWR1 PB_PWR1 SATA0-3 JSD1 P1_NVME1 PB_PWR2 SATA4-7 SATA8-11 P1_NVME2 FAN1...

  • Page 15: Quick Reference Table

    Chapter 1: Introduction Quick Reference Table Jumper Description Default Setting JBT1 Clear CMOS Open (Normal) JWD1 Watch Dog control Pins 1-2 (Reset) Description Status LED2 HDD Activity LED Blinking Green: HDD Active LED3 Overheat/Fan Fail LED Solid Red: OH/Fan Failure LED4 M.2 LED (for M.2-HC1) Blinking Green: M.2-HC1 Active...
  • Page 16 FatTwin AS -F1114S-FT User's Manual DUAL-BOOT 4MBIT NAND-FLASH 2G-BIT BIOS ROM CPLD 32MB BMC ROM 64MB F I/O F/W SPI SPI1 NC-SI CONN. RJ45 NC-SI RTL8211FS 1G-Base CPU USB2 [2:3] P2-PCIE[0:15] AST2600 AIOM PCIE X16 CPU USB2 [2] FANx2 P0-PCIE[8]...

  • Page 17: Chapter 2 Server Installation

    Chapter 2: Server Installation Chapter 2 Server Installation 2.1 Overview This chapter provides advice and instructions for mounting your system in a server rack. If your system is not already fully integrated with processors, system memory etc., refer to Chapter 4 for details on installing those specific components. Caution: Electrostatic Discharge (ESD) can damage electronic components.

  • Page 18: Server Precautions

    FatTwin AS -F1114S-FT User's Manual • In single rack installations, stabilizers should be attached to the rack. In multiple rack in- stallations, the racks should be coupled together. • Always make sure the rack is stable before extending a server or other component from the rack.

  • Page 19: Circuit Overloading

    Chapter 2: Server Installation Note: Insert the nodes into the chassis from the bottom left to bottom right and then up all the way to the top (left first, then right). Do not insert the nodes on one side fully (leaving one side empty) and then the other side or it will be very hard to insert the last node.

  • Page 20: Rack Mounting Instructions

    FatTwin AS -F1114S-FT User's Manual 2.3 Rack Mounting Instructions This section provides information on installing the chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean that the assembly procedure will differ slightly from the instructions provided.

  • Page 21: Identifying The Sections Of The Rack Rails

    Chapter 2: Server Installation Identifying the Sections of the Rack Rails The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections: A front section which secures to the front post of the rack and a rear section which adjusts in length and secures to the rear post of the rack.

  • Page 22: Installing The Rails On A Rack

    FatTwin AS -F1114S-FT User's Manual Installing the Rails on a Rack Installing the Rails 1. Adjust the length of both rails as described on the previous page. 2. Align the front section of the outer rail with the slots on the front post of the rack. Secure the front of the outer rail to the rack with two screws.

  • Page 23: Chassis Installation

    Chapter 2: Server Installation Chassis Installation Installing the Chassis into a Rack 1. Confirm that the rails are correctly installed on the rack. 2. Align the bottom of the chassis with the bottom of the rails. 3. Insert the chassis into the AS -F1114S-FT rails, keeping the pressure even on both sides, pushing the chassis into the rack until it clicks into the locked position.

  • Page 24: Chapter 3 Maintenance And Component Installation

    FatTwin AS -F1114S-FT User's Manual Chapter 3 Maintenance and Component Installation This chapter provides instructions on installing and replacing main system components. To prevent compatibility issues, only use components that match the specifications and/or part numbers given. Installation or replacement of most components require that power first be removed from the system.

  • Page 25: Chassis Components

    Chapter 3: Maintenance and Component Installation 3.2 Chassis Components The chassis includes power supplies, fans and eight nodes. Each node is a separate system containing a drawer with a serverboard and other components. Each node may be removed from the chassis separately. Installing and Removing the Node Drawers The CSE-F418IF4 chassis contains eight individual motherboards in separate node drawers (Figure 3-1).

  • Page 26: Removing Nodes From The Chassis

    FatTwin AS -F1114S-FT User's Manual Removing Nodes from the Chassis Each of the eight individual nodes may be removed from the chassis separately. Note that when a node is removed from the chassis, the hard drives located in the node will shut-down.

  • Page 27: Nodes And Associated Hard Drives

    Chapter 3: Maintenance and Component Installation Nodes and Associated Hard Drives The CSE-F418IF4 chassis contains up to eight individual motherboards in separate 1U nodes. Each node has either two 2.5" drives, with an additional optional two 2.5" drives for the P2 model.
  • Page 28 FatTwin AS -F1114S-FT User's Manual 4. Remove the screws securing the hard drive to the tray and set them aside for later use. Figure 3-4. Installing a Hard Drive in the Drive Carrier 5. Lift the hard drive up and out of the tray.

  • Page 29: Installing Expansion Cards

    Chapter 3: Maintenance and Component Installation Installing Expansion Cards Each of the eight nodes in the chassis has space for two low-profile expansion cards mounted in the front of the node. The following instructions are for chassis nodes in which the expansion cards are mounted in the front of the node.

  • Page 30: Assembling The Pcie Slot Bracket Assembly

    FatTwin AS -F1114S-FT User's Manual Assembling the PCIe Slot Bracket Assembly Each node supports two expansion cards in front of the node. Each expansion card must be plugged into a riser card, which in turn plugs into the motherboard. Assembling the PCIe Slot Bracket Assembly 1.
  • Page 31 Chapter 3: Maintenance and Component Installation 5. Insert the riser card into the appropriate slot on the motherboard. 6. Simultaneously insert the expansion card into the riser card, while sliding the expansion card bracket into the open PCIe slot. Figure 3-8. Installing the Expansion Card and Bracket...

  • Page 32: Installing Air Shrouds

    FatTwin AS -F1114S-FT User's Manual Installing Air Shrouds Air Shrouds Air shrouds concentrate airflow to maximize fan efficiency. The CSE-F418IF4 chassis require an air shroud in each node. Installing an Air Shroud 1. Remove the node from the chassis and remove the cover from the node as described previously in this section.

  • Page 33: Removing And Installing System Fans

    Chapter 3: Maintenance and Component Installation Removing and Installing System Fans Removing and Installing External System Fans The chassis has eight fans in the rear of the system. Fans that fail can be replaced by simply removing them from the rear without powering down the system. Removing a Rear Exhaust Fan 1.

  • Page 34: Replacing The Power Supplies

    The CSE-F418IF4 chassis utilizes redundant power supplies. In the unlikely event that the power supply unit needs to be replaced, a power supply can be removed, without powering down the system. Replacement units can be ordered directly from Supermicro (See the contact information in the Preface of this manual).

  • Page 35: Motherboard Components

    When receiving a motherboard without a processor pre-installed, make sure that the plastic CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your retailer immediately. • Refer to the Supermicro website for updates on CPU support.
  • Page 36 FatTwin AS -F1114S-FT User's Manual Installing the Processor and Heatsink 1. Unscrew the screws holding down Force Frame in the sequence of 3-2-1. The screws are numbered on the Force Frame next to each screw hole. Screw #3 Screw #1...
  • Page 37 Chapter 3: Maintenance and Component Installation 3. Lift the Rail Frame up by gripping the lift tabs near the front end of the rail frame. While keeping a secure grip of the Rail Frame, lift it to a position so you can do the next step of removing the External Cap.
  • Page 38 FatTwin AS -F1114S-FT User's Manual 5. The CPU Package is shipped from the factory with the Carrier Frame pre-assembled. Grip the handle of the Carrier Frame/CPU Package assembly from its shipping tray, and while gripping the handle, align the flanges of the Carrier Frame onto the rails of the Rail Frame so its pins will be at the bottom when the Rail Frame is lowered later.
  • Page 39 Chapter 3: Maintenance and Component Installation 8. Gently lower the Rail Frame down onto the socket until the latches on the Rail Frame engage with the Socket housing. and it rests in place. DO NOT force it into place! 9. Gently lower the Force Frame down onto the Rail Frame and hold it in place until it is seated in the Socket housing.
  • Page 40 FatTwin AS -F1114S-FT User's Manual 1. After the Force Frame is secured and the CPU package is in place, now you must install the heatsink to the frame. Lower the heatsink down till it rests securely over the four screw holes on CPU Package on the socket frame.
  • Page 41 Chapter 3: Maintenance and Component Installation Un-installing the Processor and Heatsink 1. Remove the heatsink attached to the top of the CPU Package by reversing the installation procedure. 2. Clean the Thermal grease left by the heatsink on the CPU package lid to limit the risk of it contaminating the CPU package land pads or contacts in the socket housing.

  • Page 42: Memory Support And Installation

    FatTwin AS -F1114S-FT User's Manual 3.4 Memory Support and Installation Note: Check the Supermicro website for recommended memory modules. Important: Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. Memory Support The H12SSFR-AN6 supports up to 4TB registered ECC DDR4-3200 memory in 16 DIMM slots.

  • Page 43: Dimm Module Population

    Chapter 3: Maintenance and Component Installation Populating the DIMM Slots Channel CPU# 1 DIMM (Not Recommended) CPU1 2 DIMMs (Not Recommended) CPU1 4 DIMMs CPU1 6 DIMMs Unbalanced (Not Recommended) 8 DIMMs CPU1 16 DIMMs CPU1 DIMM Module Population There is no specific order or sequence required when installing memory modules. However do keep the following in mind: •...

  • Page 44: Dimm Installation

    FatTwin AS -F1114S-FT User's Manual DIMM Installation 1. Insert the desired number of DIMMs into the memory slots, there is no specific sequence or order required. Receptive 2. Push the release tabs outwards on both Point ends of the DIMM slot to unlock it.

  • Page 45: Motherboard Battery

    Chapter 3: Maintenance and Component Installation Motherboard Battery The motherboard uses non-volatile memory to retain system information when system power is removed. This memory is powered by a lithium battery residing on the motherboard. Replacing the Battery Begin by removing power from the system as described in section 3.1. 1.

  • Page 46: Chapter 4 Motherboard Connections

    FatTwin AS -F1114S-FT User's Manual Chapter 4 Motherboard Connections This section describes the connections on the motherboard and provides pinout definitions. Note that depending on how the system is configured, not all connections are required. The LEDs on the motherboard are also described here. A severboard layout indicating component locations may be found in Chapter 1.

  • Page 47: Headers And Connectors

    Chapter 4: Motherboard Connections HDD/SSD Power Connectors HDD_PWR1 and HDD_PWR2 are used to provide power to the onboard HDD/SSD ports. Refer to the table below for pin definitions. HDD/SSD Power Connector Pin Definitions Pin# Definition Pin# Definition 4.2 Headers and Connectors Onboard Fan Headers There are two fan headers on the motherboard.
  • Page 48 FatTwin AS -F1114S-FT User's Manual SATA Ports The H12SSFF-AN6 has twelve standard onboard SATA3 ports (SATA0 through SATA11). I-SATA0 is also included as an internal SATA3 port. NVMe Ports The P1_NVME1 and P1_NVME2 connections are NVMe ports, which provide high-speed, low- latency PCIe 4.0 x8 connections directly from the CPU to NVMe SSDs (Solid State Drives).
  • Page 49 Chapter 4: Motherboard Connections M.2 Connectors The M.2 (M.2-HC1, M.2-HC2) connectors are for devices such as memory cards, wireless adapters, etc. These devices must conform to the PCIe M.2 specifications (formerly known as NGFF). This particular PCIe M.2 supports M-Key (PCIe x4) storage cards. Form factors 2260, 2280, 22110 are supported.
  • Page 50 FatTwin AS -F1114S-FT User's Manual NCSI Connector The NC-SI connector provides and interface between the BMC and the NIC for remote server management. Use the appropriate cable to employ this feature. JCOM Connector The H12SSFF-AN6 provides an onboard COM port connection with the JCOM1 header. Use...

  • Page 51: Front I/O Ports

    Chapter 4: Motherboard Connections 4.3 Front I/O Ports See the figure below for the locations and descriptions of the various I/O ports on the front of the motherboard. Figure 4-1. Front I/O Port Locations Front I/O Ports Description Description VGA Port USB0 Port (USB 3.0) USB1 Port (USB 3.0) IPMI LAN Port...
  • Page 52 FatTwin AS -F1114S-FT User's Manual VGA Port There is one VGA port on the front I/O panel. Universal Serial Bus (USB) Ports There are two USB 3.0 ports (USB0/1) on the I/O panel. These support the type A connector. IPMI LAN Port There is one gigabit LAN port located on the I/O panel (LAN1).

  • Page 53: Jumpers

    Chapter 4: Motherboard Connections 4.4 Jumpers Explanation of Jumpers To modify the operation of the motherboard, jumpers are used to choose between optional settings. Jumpers create shorts between two pins to change the function associated with it. Pin 1 is identified with a square solder pad on the printed circuit board. See the motherboard layout page for jumper locations.
  • Page 54 FatTwin AS -F1114S-FT User's Manual Watch Dog JWD1 controls the Watch Dog timer function. Watch Dog is a monitor that can reboot the system when a software application hangs. Close pins 1-2 to allow the Watch Dog to reset the system if an application hangs. Close pins 2-3 to generate a non-maskable interrupt signal for the application that hangs.

  • Page 55: Led Indicators

    Note: UID can be triggered via IPMI. For more information on IPMI, please refer to the IPMI User's Guide posted on our website at https://www.supermicro.com/support/manuals/. UID LED LED Color...
  • Page 56 FatTwin AS -F1114S-FT User's Manual M.2 LEDs LED4 and LED5 are the LED activity indicators for the two M.2 connections (M.2_HC1 and M.2_HC2, repectively). When these LEDs are blinking, their respective M.2 is active. See the table below for the LED status.

  • Page 57: Chapter 5 Software

    USB/SATA DVD drive, or a USB flash drive, or the IPMI KVM console. 2. Go to the Supermicro web page for your motherboard and click on "Download the Latest Drivers and Utilities", select the proper driver, and copy it to a USB flash drive.
  • Page 58 FatTwin AS -F1114S-FT User's Manual 4. During Windows Setup, continue to the dialog where you select the drives on which to install Windows. If the disk you want to use is not listed, click on “Load driver” link at the bottom left corner.

  • Page 59: Driver Installation

    The Supermicro website contains drivers and utilities for your system at https://www. supermicro.com/wftp/driver. Some of these must be installed, such as the chipset driver. After accessing the website, go into the CDR_Images (in the parent directory of the above link) and locate the ISO file for your motherboard. Download this file to to a USB flash drive or a DVD.

  • Page 60: Superdoctor ® 5

    5.3 SuperDoctor ® The Supermicro SuperDoctor 5 is a program that functions in a command-line or web-based interface for Windows and Linux operating systems. The program monitors such system health information as CPU temperature, system voltages, system power consumption, fan speed, and provides alerts via email or Simple Network Management Protocol (SNMP).

  • Page 61: Ipmi

    BIOS settings that are related to IPMI. For general documentation and information on IPMI, visit our website at: http://www.supermicro.com/products/nfo/IPMI.cfm. BMC ADMIN User Password For security, each system is assigned a unique default BMC password for the ADMIN user.

  • Page 62: Chapter 6 Uefi Bios

    FatTwin AS -F1114S-FT User's Manual Chapter 6 UEFI BIOS 6.1 Introduction This chapter describes the AMIBIOS™ Setup utility for H12SSFF-AN6 motherboards that are equipped with the EPYC 7002 Series Processor. The BIOS is stored on a chip and can be easily upgraded using a flash program.

  • Page 63: Main Setup

    Note: The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00. The date's default value is 01/01/2015 after RTC reset. Supermicro H12SSFF-AN6 BIOS Version This item displays the version of the BIOS ROM used in the system.
  • Page 64 FatTwin AS -F1114S-FT User's Manual Build Date This item displays the date when the version of the BIOS ROM used in the system was built. CPLD Version This item displays the CPLD version of the BIOS ROM used in the system.

  • Page 65: Advanced

    Chapter 6: UEFI BIOS 6.3 Advanced Use the arrow keys to select a top item and press <Enter> to access the submenu items. Warning: Take caution when changing the Advanced settings. An incorrect value, a very high DRAM frequency, or an incorrect DRAM timing setting may make the system unstable.
  • Page 66 FatTwin AS -F1114S-FT User's Manual Bootup NumLock State Use this feature to set the Power on state for the <Numlock> key. The options are On and Off. Wait For "F1" If Error Use this feature to force the system to wait until the 'F1' key is pressed if an error occurs.
  • Page 67 Chapter 6: UEFI BIOS Trusted Computing Security Device Support If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard security devices will be enabled for TPM (Trusted Platform Module) support to enhance data integrity and network security. Please reboot the system for a change on this setting to take effect.
  • Page 68 FatTwin AS -F1114S-FT User's Manual ACPI SRAT L3 Cache As NUMA Domain Use this setting to enable/disable ACPI SRAT L3 Cache As NUMA Domain. The options are Disabled, Enabled, and Auto. Super IO Configuration The following Super IO information will display: •...
  • Page 69 Chapter 6: UEFI BIOS Serial Port Console Redirection COM1 Console Redirection Select Enabled to enable console redirection support for a serial port specified by the user. The options are Disabled and Enabled. *If the item above set to Enabled, the following items will become available for user's configuration: Console Redirection Settings Terminal Type...
  • Page 70 FatTwin AS -F1114S-FT User's Manual Flow Control Use this feature to set the flow control for Console Redirection to prevent data loss caused by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The options are None and Hardware RTS/CTS.
  • Page 71 Chapter 6: UEFI BIOS *If the item above set to Enabled, the following items will become available for user's configuration: Console Redirection Settings Terminal Type This feature allows the user to select the target terminal emulation type for Console Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color and function key support.
  • Page 72 FatTwin AS -F1114S-FT User's Manual VT-UTF8 Combo Key Support Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The options are Disabled and Enabled. Recorder Mode Select Enabled to capture the data displayed on a terminal and send it as text messages to a remote server.
  • Page 73 Chapter 6: UEFI BIOS Console Redirection Settings Out-of-Band Mgmt Port The feature selects a serial port in a client server to be used by the Microsoft Windows Emergency Management Services (EMS) to communicate with a remote host server. The options are COM1 and SOL. Terminal Type Use this feature to select the target terminal emulation type for Console Redirection.
  • Page 74 FatTwin AS -F1114S-FT User's Manual CPU Configuration SMT Control Use this setting to specify Simultaneous Multithreading. The options are Disabled and Auto. Core Performance Boost This setting is used to configure for Core Performance Boost. Options include Disabled and Auto.
  • Page 75 Chapter 6: UEFI BIOS CPU Information These sections are for informational purposes. They will display some details about the detected CPUs on the motherboard, such as: • CPU Version • Number of Cores Running • Processor Family • Processor Model •...
  • Page 76 FatTwin AS -F1114S-FT User's Manual Memory Configuration Memory Clock This setting allows you to select different memory clock speed. Options include Auto and supported frequencies. Memory Interleaving This setting controls fabric level memory interleaving. Note that the channel, die and socket have requirements on memory populations and it will be ignored if the memory doesn't support the selected option.
  • Page 77 Chapter 6: UEFI BIOS Above 4G Decoding This setting Disables or Enables 64-bit capable devices ability to be decoded in above 4G address space (only if the system supports 64-bit PCI decoding). SR-IOV Support If the system has SR-IOV capable PCI-E devices, this setting will Disable or Enable the Single Root IO Virtualization Support for the system.
  • Page 78 FatTwin AS -F1114S-FT User's Manual CPU AIOM OPROM PCI-E 4.0 x16 OPROM This setting enables or disables the listed AIOM OPROM option. The options are Disabled, EFI and Legacy. RSC-PR-6-X2 PCI-E 4.0 x16 OPROM This setting enables or disables the PCI/PCIX/PCIe slot 4 OPROM option. The options are Disabled, EFI and Legacy.
  • Page 79 Chapter 6: UEFI BIOS IPv6 HTTP Support This setting allows you to Disable or Enable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support will not be available. PXE Boot Wait Time This setting allows you to set in a number field the wait time to press the ESC key to abort the PXE boot.
  • Page 80 FatTwin AS -F1114S-FT User's Manual SATA Information This section displays information on the detected SATA devices: KMIP Server Configuration This feature allows the user to adjust KMIP Server network parameters. KMIP Server IP address KMIP TCP Port number TimeZone Client UserName...
  • Page 81 Chapter 6: UEFI BIOS iSCSI Configuration iSCSI Initiator Name This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format. Once the name of the iSCSI Initiator is entered into the system, configure the proper settings for the following items.

  • Page 82: Ipmi

    FatTwin AS -F1114S-FT User's Manual 6.4 IPMI This tab allows you to configure the following IPMI settings for the system. Use this feature to configure Intelligent Platform Management Interface (IPMI) settings. BMC Firmware Revision This item indicates the IPMI firmware revision used in your system.
  • Page 83 Chapter 6: UEFI BIOS Erasing Settings Erase SEL Select Yes, On next reset to erase all system event logs upon next system reboot. Select Yes, On every reset to erase all system event logs upon each system reboot. Select No to keep all system event logs after each system reboot.
  • Page 84 FatTwin AS -F1114S-FT User's Manual Station MAC Address This item displays the Station MAC address for this computer. Mac addresses are 6 two- digit hexadecimal numbers. Gateway IP Address This item displays the Gateway IP address for this computer. This should be in decimal and in dotted quad form (i.e., 172.31.0.1).

  • Page 85: Event Logs

    Chapter 6: UEFI BIOS 6.5 Event Logs This tab allows the user to configure the following event logs settings for the system. Enabling/Disabling Options SMBIOS Event Log Select Enabled to enable SMBIOS (System Management BIOS) Event Logging during system boot. The options are Disabled and Enabled. Erasing Settings Erase Event Log Select Yes to erase all error events in the SMBIOS (System Management BIOS) log before...
  • Page 86 FatTwin AS -F1114S-FT User's Manual When Log is Full Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log is full.

  • Page 87: Security

    Chapter 6: UEFI BIOS 6.6 Security This tab allows you to configure the following security settings for the system. Administrator Password Press Enter to create a new, or change an existing Administrator password. Note that if the Administrator Password is erased, the User Password will be cleared as well. Password Check Select Setup for the system to check for a password at Setup.
  • Page 88 FatTwin AS -F1114S-FT User's Manual Secure Boot Mode In Custom Mode, secure boot policy variables can be configured by a physically present user without full authentication. Options include Standard and Custom. CSM Support Options are Enabled and Disabled. Key Management Options are Enabled and Disabled.

  • Page 89: Boot

    Chapter 6: UEFI BIOS 6.7 Boot Use this tab to configure Boot Settings: Boot Mode Select Use this item to select the type of device that the system is going to boot from. The options are Legacy, UEFI, and Dual. LEGACY to EFI Support This option Disables or Enables the system to boot to an EFI OS after the boot failed from the legacy boot order.
  • Page 90 FatTwin AS -F1114S-FT User's Manual Delete Boot Option Use this feature to remove a pre-defined boot device from which the system will boot during startup. The settings are [any pre-defined boot device] and UEFI: Built-in EFI shell. UEFI Application Boot Priorities This feature allows the user to specify which UEFI devices are boot devices.

  • Page 91: Save & Exit

    Chapter 6: UEFI BIOS 6.8 Save & Exit Select the Save & Exit tab to enter the Save & Exit BIOS Setup screen. Save Options Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system configuration, and reboot the computer.
  • Page 92 FatTwin AS -F1114S-FT User's Manual Discard Changes Select this option and press <Enter> to discard all the changes and return to the AMI BIOS utility Program. Default Options Restore Optimized Defaults To set this feature, select Restore Optimized Defaults from the Save & Exit menu and press <Enter>.

  • Page 93: Appendix A Standardized Warning Statements For Ac Systems

    Supermicro's Technical Support department for assistance. Only certified technicians should attempt to install or configure components. Read this appendix in its entirety before installing or configuring components in the Supermicro chassis. These warnings may also be found on our website at http://www.supermicro.com/about/...
  • Page 94 Appendix A: Standardized Warning Statements Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
  • Page 95 FatTwin AS -F1114S-FT User's Manual . ٌ ‫ا ك ً ف حالة و ٌ يك أى تتسبب ف اصابة جسذ ة ٌ هذا الزهز ع ٌ خطز !تحذ ز‬ ‫قبل أى تعول عىل أي هعذات،يك عىل علن بالوخاطز ال ا ٌجوة عي الذوائز‬...
  • Page 96 Appendix A: Standardized Warning Statements Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation. .‫יש...
  • Page 97 FatTwin AS -F1114S-FT User's Manual Warnung Dieses Produkt ist darauf angewiesen, dass im Gebäude ein Kurzschluss- bzw. Überstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als: 250 V, 20 A beträgt. ¡Advertencia! Este equipo utiliza el sistema de protección contra cortocircuitos (o sobrecorrientes) del edificio.
  • Page 98 Appendix A: Standardized Warning Statements Power Disconnection Warning Warning! The system must be disconnected from all sources of power and the power cord removed from the power supply module(s) before accessing the chassis interior to install or remove system components. 電源切断の警告...
  • Page 99 FatTwin AS -F1114S-FT User's Manual ‫אזהרה מפני ניתוק חשמלי‬ ‫!אזהרה‬ ‫יש לנתק את המערכת מכל מקורות החשמל ויש להסיר את כבל החשמלי מהספק‬ ‫.לפני גישה לחלק הפנימי של המארז לצורך התקנת או הסרת רכיבים‬ ‫يجب فصم اننظاو من جميع مصادر انطاقت وإ ز انت سهك انكهرباء من وحدة امداد‬...
  • Page 100 Appendix A: Standardized Warning Statements Attention Il est vivement recommandé de confier l'installation, le remplacement et la maintenance de ces équipements à des personnels qualifiés et expérimentés. !‫אזהרה‬ .‫צוות מוסמך בלבד רשאי להתקין, להחליף את הציוד או לתת שירות עבור הציוד‬ ‫واملدربيه...
  • Page 101 FatTwin AS -F1114S-FT User's Manual Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem Zutritt vorgesehen. Der Zutritt zu derartigen Bereichen ist nur mit einem Spezialwerkzeug, Schloss und Schlüssel oder einer sonstigen Sicherheitsvorkehrung möglich. ¡Advertencia! Esta unidad ha sido diseñada para instalación en áreas de acceso restringido. Sólo puede obtenerse acceso a una de estas áreas mediante la utilización de una herramienta especial,...
  • Page 102 Appendix A: Standardized Warning Statements Battery Handling Warning! There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions 電池の取り扱い...
  • Page 103 FatTwin AS -F1114S-FT User's Manual ‫هناك خطر من انفجار يف حالة اسحبذال البطارية بطريقة غري صحيحة فعليل‬ ‫اسحبذال البطارية‬ ‫فقط بنفس النىع أو ما يعادلها مام أوصث به الرشمة املصنعة‬ ‫جخلص من البطاريات املسحعملة وفقا لحعليامت الرشمة الصانعة‬ 경고! 배터리가 올바르게 교체되지 않으면 폭발의 위험이 있습니다. 기존 배터리와 동일하거나 제...
  • Page 104 Appendix A: Standardized Warning Statements ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por completo el suministro de energía, deben desconectarse todas las conexiones. Attention Cette unité peut avoir plus d'une connexion d'alimentation. Pour supprimer toute tension et tout courant électrique de l'unité, toutes les connexions d'alimentation doivent être débranchées.
  • Page 105 FatTwin AS -F1114S-FT User's Manual Backplane Voltage Warning! Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing. バックプレーンの電圧 システムの稼働中は危険な電圧または電力が、 バックプレーン上にかかっています。 修理する際には注意く ださい。 警告 当系统正在进行时，背板上有很危险的电压或能量，进行维修时务必小心。 警告 當系統正在進行時，背板上有危險的電壓或能量，進行維修時務必小心。 Warnung Wenn das System in Betrieb ist, treten auf der Rückwandplatine gefährliche Spannungen oder Energien auf.
  • Page 106 Appendix A: Standardized Warning Statements ‫هناك خطز مه التيار الكهزبايئ أوالطاقة املىجىدة عىل اللىحة‬ ‫عندما يكىن النظام يعمل كه حذ ر ا عند خدمة هذا الجهاس‬ 경고! 시스템이 동작 중일 때 후면판 (Backplane)에는 위험한 전압이나 에너지가 발생 합니다. 서비스 작업 시 주의하십시오. Waarschuwing Een gevaarlijke spanning of energie is aanwezig op de backplane wanneer het systeem in gebruik is.
  • Page 107 FatTwin AS -F1114S-FT User's Manual ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ .‫התקנת הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫تركيب املعدات الكهربائية يجب أن ميتثل للقىاويه املحلية والىطىية املتعلقة‬ ‫بالكهرباء‬ 경고! 현 지역 및 국가의 전기 규정에 따라 장비를 설치해야 합니다.
  • Page 108 Appendix A: Standardized Warning Statements Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. ‫סילוק המוצר‬ !‫אזהרה‬ .‫סילוק סופי של מוצר זה חייב להיות בהתאם להנחיות וחוקי המדינה‬ ‫التخلص...
  • Page 109 FatTwin AS -F1114S-FT User's Manual Warnung Gefährlich Bewegende Teile. Von den bewegenden Lüfterblätter fern halten. Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt.
  • Page 110 Verbindungskabeln, Stromkabeln und/oder Adapater, die Ihre örtlichen Sicherheitsstandards einhalten. Der Gebrauch von anderen Kabeln und Adapter können Fehlfunktionen oder Feuer verursachen. Die Richtlinien untersagen das Nutzen von UL oder CAS zertifizierten Kabeln (mit UL/CSA gekennzeichnet), an Geräten oder Produkten die nicht mit Supermicro gekennzeichnet sind.
  • Page 111 ‫.قيرح وأ لطع يف ببستي دق ىرخأ تالوحمو تالباك يأ مادختسا .ميلسلا سباقلاو لصوملا مجح‬ ‫ لبق نم ةدمتعملا تالباكلا مادختسا تادعملاو ةيئابرهكلا ةزهجألل ةمالسلا نوناق رظحي‬UL ‫ وأ‬CSA ‫( ةمالع لمحت يتلاو‬UL/CSA) ‫ لبق نم ةددحملاو ةينعملا تاجتنملا ريغ ىرخأ تادعم يأ عم‬Supermicro.
  • Page 112 사항을 준수하여 제공되거나 지정된 연결 혹은 구매 케이블, 전원 케이블 및 AC 어댑터를 사용하십시오. 다른 케이블이나 어댑터를 사용하면 오작동이나 화재가 발생할 수 있습니다. 전기 용품 안전법은 UL 또는 CSA 인증 케이블 (코드에 UL / CSA가 표시된 케이블)을 Supermicro 가 지정한 제품 이외의 전기 장치에 사용하는 것을 금지합니다. Stroomkabel en AC-Adapter...

  • Page 113: Appendix B System Specifications

    Appendix B: System Specifications Appendix B System Specifications Processors Dual AMD EPYC™ 7002 Series processors in Socket SP3 type sockets for each node. Note: Please refer to the product page on our website for updates to supported processors. Chipset System on Chip chipset BIOS 32MB SPI AMI BIOS®...
  • Page 114 FatTwin AS -F1114S-FT User's Manual Regulatory Compliance FCC, ICES, CE, VCCI, RCM, NRTL, CB Applied Directives, Standards EMC/EMI: 2014/30/EU (EMC Directive) FCC Part 15 ICES-003 VCCI 32-1 AS/NZS CISPR 32 EN55032 EN55035 EN 61000-3-2 EN 61000-3-3 EN 61000-4-2 EN 61000-4-3...

  • Page 115: Appendix C Uefi Bios Recovery

    Warning: Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. In no event shall Supermicro be liable for direct, indirect, special, incidental, or consequential damages arising from a BIOS update.
  • Page 116 FatTwin AS -F1114S-FT User's Manual The file system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32) which is installed on a bootable or non-bootable USB-attached device. However, the BIOS might need several minutes to locate the SUPER.ROM file if the media size becomes too large due to the huge volumes of folders and files stored in the device.
  • Page 117 Appendix C: UEFI BIOS Recovery 3. After locating the healthy BIOS binary image, the system will enter the BIOS Recovery menu as shown below. Note: At this point, you may decide if you want to start the BIOS recovery. If you decide to proceed with BIOS recovery, follow the procedures below.
  • Page 118 FatTwin AS -F1114S-FT User's Manual 5. After the BIOS recovery process is complete, press any key to reboot the system. 6. Using a different system, extract the BIOS package into a USB flash drive. 7. Press <Del> continuously during system boot to enter the BIOS Setup utility. From the top of the tool bar, select Boot to enter the submenu.
  • Page 119 Appendix C: UEFI BIOS Recovery 8. When the UEFI Shell prompt appears, type fs# to change the device directory path. Go to the directory that contains the BIOS package you extracted earlier from Step 6. Enter flash.nsh BIOSname.### at the prompt to start the BIOS update process. Note: Do not interrupt this process until the BIOS flashing is complete.

  • Page 120: Appendix D Bsmi Safety Warnings

    FatTwin AS -F1114S-FT User's Manual Appendix D BSMI Safety Warnings 限用物質含有情況標示聲明書 Declaration of the Presence Condition of the Restricted Substances Marking 設備名稱：伺服器/ Server Equipment name 型號（型式）：F418-FT (系列型號: ): AS -F1114S-FT ,F418F-Q22H12, F418F-Q20H12 , F418-22 , F418-20 Type designation (Type) Restricted substances and its chemical symbols 限用物質及其化學符號...
  • Page 121 Appendix D: Traditional Chinese Version of Safety Warnings 輸入額定: PWS-2K02P-1R 200-240 V ~, 50-60 Hz, 10.0 - 9.8 A PWS-2K20A-1R 100-127 V ~, 50-60 Hz, 12.0 - 11.0 A 200-240 V ~, 50-60 Hz, 10.0 - 9.8 A *使用者不能任意拆除或替換內部配備 *報驗義務人之姓名或名稱：美超微電腦股份有限公司 *報驗義務人之地址：新北市中和區建一路...

Table of Contents