Table of Contents
Advertisement
FatTwin F618R3-FT USER'S MANUAL
1-2
Serverboard Features
At the heart of the FatTwin F618R3-FT lies the X10DRFF, a dual processor
serverboard based on the Intel® PCH C612 chipset and designed to provide
maximum performance. Eight of these serverboards are mounted in node trays for
the F418IL-R1K62BP chassis.
The sections below cover the main features of the X10DRFF serverboard (see
Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRFF supports single or dual Intel® Xeon® E5-2600 v3/v4 series
processors (Socket R3 LGA 2011). Each processor supports four full-width Intel
QuickPath Interconnect (QPI) links, with support of up to 38.4 GT/s per QPI link
and with Data Transfer Rate of up to 9.6 GT/s per direction. Please refer to the
serverboard description pages on our web site for a complete listing of supported
processors (www.supermicro.com).
Memory
Each X10DRFF serverboard node has eight (8) DIMM slots supporting up to 1 TB
3DS LRDIMM registered ECC or 512 GB of DDR4-2400/2133/1866/1600 MHz
speed RDIMM SDRAM in up to 1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB, 64 GB
or 128 GB (3DS LRDIMM only) size at 1.20V voltages. See Chapter 5 for details.
Note: For the latest CPU/memory updates, please refer to our website at
www.supermicro.com.
Serial ATA
A Serial ATA controller is integrated into the PCH C612 to provide up to a ten-port
SATA subsystem, (up to six SATA 3 (6 Gb/s), two SATA 3 SCU and two SATA+Power
connection headers for SATA DOM and power supported by Intel SCU (S-SATA2/3))
which is RAID 0, 1, 5 and 10 supported. The FatTwin F618R3-FT server however
only has two hot-swap 3.5" HDD in each node, so the SATA drives only support
RAID 0 and 1 in each node.
PCI Expansion Slots
The FatTwin F618R3-FT has for each node one (1) PCI-Exp 3.0 x16 slots slot
available for use with a riser card.
1-2
Advertisement
Table of Contents
