Memory Support For The X10Drff Serverboard - Supermicro FatTwin F618R3-FT User Manual

FatTwin F618R3-FT USER'S MANUAL
Notes:
•
1 GB, 2 GB, 4 GB, 8 GB, 16 GB, 32 GB, 64 GB or 128 GB (3DS LRDIMM only)
size at 1.20V memory modules are supported.
•
It is highly recommended that you remove the power cord from the system before
installing or changing memory modules.
•
Please refer to our web site for memory that has been tested on the X10DRFF
serverboard.

Memory Support for the X10DRFF Serverboard

The X10DRFF serverboard supports up to 1 TB of Load Reduced (3DS LRDIMM)
or up to 512 GB of Registered (RDIMM) DDR4-2400/2133/1866/1600 MHz memory
modules in eight (8) slots (with 1 DIMM per channel). Memory speed support is
pending on the processors used in the system. For the latest memory updates,
please refer to our website at www.supermicro.com.
Processor & Memory Module Population Configuration
For memory to work properly, follow the tables below for memory installation.
Processor and Memory Module Population for Optimal Performance
Number of
CPUs+DIMMs
1 CPU &
CPU1
2 DIMMs P1-DIMMA1/P1-DIMMB1
1 CPU & CPU1
4 DIMMs P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1
2 CPUs & CPU1 + CPU2
4 DIMMs P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1
2 CPUs &
CPU1 + CPU2
6 DIMMs P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1
2 CPUs &
CPU1 + CPU2
8 DIMMs P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-
DIMMG1/P2-DIMMH1
Processors and their Corresponding
Memory Modules
CPU# Corresponding DIMM Modules
CPU 1
P1-
DIMMA1
CPU2 P2-
DIMME1
CPU and Memory Population Configuration Table
(For memory to work properly, please follow the instructions below.)
P1- P1- P1-
DIMMB1 DIMMC1 DIMMD1
P2- P2- P2-
DIMMF1 DIMMG1 DIMMH1
5-10