Parameter Assignment; Quick Start (1); Quick Commissioning (1.1) - Siemens SITRANS LR500 Series Operating Instructions Manual

Parameter assignment

This chapter includes all parameters accessible via local operation.
Note
Parameter visibility
A full list of available parameters and settings for each are shown in the manual. However, some
parameters and settings may not appear on the device, as visibility is based on the application
and configuration selected.
Parameters are identified by name (followed by parameter number in parenthesis), and
organized into function groups within a menu structure.
Note
• In Navigation view, local buttons (
• Press
9.1

Quick start (1)

From measurement view, press
select the "Quick commissioning wizard". Press
instructions.
Note
Do not use a quick commissioning wizard to modify individual parameters. (Perform
customization for your application only after "Quick commissioning wizard" has been
completed).
• See Quick commissioning via HMI (Page 69).
• See Quick commissioning via SIMATIC PDM (Page 207).
Note
No user-relevant data is lost in the event of a power failure.
9.1.1

Quick commissioning (1.1)

Provides step-by-step procedure to set up common applications easily.
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA
button to open Edit Mode, or to save a modification.
) navigate in the direction of the arrow.
button to enter parameter view, then press
button to open the first step, and follow the
9
button to
113