Changing Parameter Settings Using Simatic Pdm - Siemens SITRANS LR500 Series Operating Instructions Manual

Step 3 – Ranges
Step 4 – Summary
Check parameter settings, and click on BACK to return and revise values, FINISH to save settings
offline, or FINISH AND DOWNLOAD to save settings offline and transfer them to the device.
The message Quick Start was successful will appear. Click on OK.
8.6.1.8

Changing parameter settings using SIMATIC PDM

Note
• For a complete list of parameters, see Parameter Reference (Page 113).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 98) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields
read Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save settings
offline. The status fields are cleared.
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA
Operating
8.6 Remote operation
97