Parameter assignment
9.3 Maintenance and diagnostics (3)
Note
Start view set automatically by wizard
The process value to display on device after power on is set automatically by the "Quick
commissioning wizard".
• When parameter "Operation" is set in the wizard, the value is written to parameter "Start
view".
• If a change is made to parameter "Start view" or parameter "PV selection" after running the
wizard, the last one set will apply.
• Options "Volume" and "Custom" are not visible in measurement view until configured. If one
of these unconfigured options is selected in parameter "Start view", measurement view will
show the next visible process value.
9.2.7.2
Contrast (2.7.2)
Sets contrast level on local display.
Setting
Default
9.2.7.3
Display test (2.7.3)
Used to test device display.
9.3
Maintenance and diagnostics (3)
The following parameters relate to device maintenance and diagnostics.
128
•
0 %
•
10 %
•
20 %
•
30 %
•
40 %
•
50 %
•
60 %
•
70 %
•
80 %
•
90 %
•
100 %
50 %
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA